Proud to be a UK-based company
Contact us
Important compatibility info
| for OE number | 24312-27250 S2 |
| Number of Teeth | 123 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Weight | 1.52 kg |
| Width | 28 mm |
| Water pump impeller material | Metal |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (31213)
- 1x Febi Water Pump, engine cooling (26462)
£113.55
Important compatibility info
| Weight | 1.050 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 06 15 418 |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33047)
- 1x Febi Tensioner, timing chain (33048)
- 1x Febi Guide, timing chain (173744)
- 1x Febi Guide, timing chain (173891)
- 1x Febi Guide, timing chain (173888)
- 1x Febi Gear, balance shaft (173892)
- 1x Febi Gear, balance shaft (175525)
- 1x Febi Gear, balance shaft (175055)
- 4x Febi Screw (33067)
- 1x Febi Thrust Washer (33111)
- 3x Febi Screw (33068)
£113.55
Important compatibility info
| Weight | 6.88 kg |
| Rolling piston material | Plastic |
| Outer diameter | 203 mm. 260 mm |
| Thickness | 209 mm. 554 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 2, M12 x 1,75, M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.58
Important compatibility info
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Belts | with rounded tooth profile |
| Width of castor bearing surface | 27 mm |
| Weight | 1.430 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Width | 22 mm |
| Number of Teeth | 117 |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (40849)
- 1x Febi Water Pump, engine cooling (39114)
£113.59
Important compatibility info
| Weight | 14.1 kg |
| Length | 1944 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Weight | 9.6 kg |
| Placement on Vehicle | Rear Axle |
| Length | 444 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Weight | 2.830 kg |
| Fill Medium | Mineral Oil |
| Function | Clutch Booster |
| Type | Clutch Booster |
| Additional Information 2 | with sensor |
| Mounting bores distance | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Function | Drive Shaft |
| Weight | 9.858 kg |
| External Teeth, Diff.Side | 28 |
| Min. Length | 964 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 87.5 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 40 |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180935 |
| Weight | 6.275 kg |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Weight | 2.181 kg |
| Internal Thread Size | M26 x 1,5, M18 x 1,5 |
| Rotation Direction | Clockwise rotation |
| Pressure | 165 bar |
| Mounting points diameter | 11 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023