Important compatibility info
| Outer diameter | 53 mm |
| Inner diameter | 21 mm |
| Filter type | Filter Insert |
| Seal Diameter | 59 mm |
| Height | 112 mm |
| Function | Oil Filter |
| Replaces | 100489 |
| Additional Information 2 | with seal ring |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Water pump impeller material | Metal |
| Width | 23 mm |
| Number of Teeth | 142 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 30731727 S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27559)
- 1x Febi Water Pump, engine cooling (22145)
Important compatibility info
| Joint Type | CV Joint |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 107 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 84 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173244)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | transmission sided, Rear Axle |
| Length | 87 mm |
| Material | Thermoplast |
| Paired article numbers | 174400 |
| Inner diameter 1 | 33 mm |
| Inner diameter 2 | 104 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174397)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Additional Information | with gasket/seal |
| for OE number | 11 12 8 581 798 |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 250 mm |
| Height | 35 mm |
| Width | 180 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Replaces | 100382 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
| ABS Ring Diameter | 90 mm |
| Number of Teeth, ABS ring | 48 |
| Internal Teeth, wheel side | 34 |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Width | 201 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Length | 225 mm |
| Height | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with oil supply line |
| Additional Information 2 | with mounting kit |
| Charge Type | Exhaust Turbocharger, Turbocharger Exhaust Manifold Unit (integral manifold) |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo ProKit NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charger, charging (supercharged/turbocharged) (186655)
- 1x Febi Mounting Kit, charger (191741)
- 1x Febi Oil Line, charger (192406)
Important compatibility info
| Placement on Vehicle | Left, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bush Set, axle beam |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Inner diameter | 12 mm |
| Thickness | 90 mm |
| Outer diameter | 72 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with nuts |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
| Replaces | 14398 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (31547)
- 2x Febi Nut (14392)
- 2x Febi Bolt, axle beam mounting (26142)
- 1x Febi Mounting Paste (31941)
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 1400 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| One-sided / Double-sided | Double-sided |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Outer diameter | 150 mm |
| Material | MVQ (silicone rubber) |
| Thickness | 12 mm |
| Inner diameter | 127 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| Function | V-Ribbed Belt |
| Length | 1028 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Length | 1580 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1795 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2835 mm |
| Function | V-Ribbed Belt |
| Number of Ribs | 9 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 115 mm |
| Outer diameter | 125 mm |
| Inner diameter | 68 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | non-steered trailing axle, non-steered leading axle, Rear Axle, Front Axle, steered leading axle, Steered trailing axle |
| Additional Information 2 | with shaft seal, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Length | 124 mm |
| Material | Steel |
| Spanner Size | 17 |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1565 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


















