Proud to be a UK-based company
Contact us
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.35
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of grooves | 12 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| for OE number | 5 0035 6553 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.36
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.38
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| Length | 1588 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.43
Important compatibility info
| Function | Spring-loaded Cylinder |
| Piston Rod Length | 15 mm |
| Distance of fastening bolts | 120 mm |
| Type | Spring-loaded Cylinder |
| Stroke | 64 mm |
| Internal Thread Size | M16 x 1,5 |
| Parameter | Typ 24/30 |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.43
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.44
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 149 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (179403)
- 1x Febi Tensioner Pulley, timing belt (183428)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (186516)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (194448)
£109.48
Important compatibility info
| Rolling piston material | Plastic |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 200 mm |
| Thickness | 182 mm. 640 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.49
Important compatibility info
| Width of castor bearing surface | 39 mm |
| Outer diameter | 65 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.49
Important compatibility info
| for OE number | 03C 109 158 H S3 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (105796)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (174912)
- 1x Febi Guide, timing chain (173674)
£109.54
Important compatibility info
| Function | Cable Pull, manual transmission |
| Inner length 1 | 2923 mm |
| Outer length 1 | 3250 mm |
| Type | Cable Pull, manual transmission |
| for OE number | 81.32655.6322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.57
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Thread Size | M16 x 1,5, M12 x 1,5 |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.59
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Teeth | 23 |
| Function | Oil Pump |
| Type | Oil Pump |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.59
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.59
Important compatibility info
| Type | Solenoid valve, automatic transmission |
| Extra Description | febi Plus |
| Function | Solenoid valve, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.59
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 188158 |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 950 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.60
Important compatibility info
| Rotor Style | slotted/perforated, internally vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 66.2 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.62
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Pneumatic |
| Placement on Vehicle | Front |
| Min. Length | 284 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 44 mm. 53 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.63
Important compatibility info
| Hole Spacing | 115 mm |
| Placement on Vehicle | Rear Axle |
| Length | 666 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.63
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Min. Length | 605 mm |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 76 mm |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.64
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023