Important compatibility info
| Type | Oil Pump |
| Internal Thread Size | M6 x 1 |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 5 |
| Housing material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 21789671 |
| Inner Length | 2921 mm |
| Outer Length | 3310 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Stabiliser Diameter | 25.5 mm |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171018)
- 2x Febi Link/Coupling Rod, stabiliser bar (36043)
- 4x Febi Nut, stabiliser bar (22264)
- 4x Febi Screw (45756)
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 168 |
| for OE number | 16 06 305 S2 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28375)
- 1x Febi Water Pump, engine cooling (17283)
Important compatibility info
| Hole Spacing | 152 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 575 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Bearing/Mounting Type | Molecular Bearing |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Core Depth | 26 mm |
| Core Width | 142 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
| Core Length | 205 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 70 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 532 mm |
| Min. Length | 335 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Heating / Cooling | with jiggle pin |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Type | Control Unit, electric fan (engine cooling) |
| Function | Control Unit, electric fan (engine cooling) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 413 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 35 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 197 mm. 258 mm |
| Thickness | 213 mm. 600 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with holder |
| Number of Connectors / Ports | 3 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Additional Information 2 | with heating hoses |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 48 mm |
| Length | 860 mm |
| Additional Information 2 | with crown nut |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Type | Tie Rod |
| Paired article numbers | 178495 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm, Control Arm |
| Number of Holes | 4 |
| Material | Steel |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1231 mm |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (183223)
- 1x Febi Belt Tensioner, v-ribbed belt (184025)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (182534)
Important compatibility info
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with fastening/mounting material |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper |
| Paired article numbers | 185365 |
| Cone Size | 18 mm |
| Steering arm type | Control Arm |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (179577)
- 2x Febi Bolt, control arm (175088)
- 1x Febi Nut (22263)
- 1x Febi Screw (31032)
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| for OE number | 18011-R1A- A00 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















