Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.78
Important compatibility info
| Width | 147 mm |
| Inner diameter | 22 mm |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter | 90 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.80
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (35421)
- 1x Febi Filter Kit, crankcase ventilation (172336)
- 1x Febi Seal, oil filter housing (05970)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 2x Febi Seal, oil filter housing (35618)
- 2x Febi Oil Filter, manual transmission (38975)
- 1x Febi Air Dryer Cartridge, compressed-air system (35304)
- 1x Febi Filter, cabin air (22095)
- 1x Febi Oil Filter (172139)
£117.83
Important compatibility info
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 120 |
| Timing Chain Size | G53HS-7 |
| Function | Timing Chain Kit |
| Part number of the recommended special tools | ADK85501 |
| Type | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (100704)
- 1x Febi Tensioner, timing chain (28458)
- 1x Febi Guide, timing chain (31543)
- 1x Febi Guide, timing chain (31544)
- 1x Febi Sprocket, crankshaft (31545)
- 1x Febi Gear/Sprocket, camshaft (31546)
- 1x Febi Gasket, timing case (32153)
- 1x Febi Shaft Seal, crankshaft (32154)
- 1x Febi Pulley Bolt (47593)
- 1x Febi Oil Hose (49568)
£117.93
Important compatibility info
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 155 mm. 280 mm |
| Thickness | 155 mm. 605 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.00
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function, with wipe-wash function, with hazard warning light function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.05
Important compatibility info
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.17
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 140 |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31005)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (177812)
- 1x Febi Guide, timing chain (174544)
- 1x Febi Guide, timing chain (174609)
£118.19
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.6 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.19
Important compatibility info
| for OE number | 038 145 771 AH S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.20
Important compatibility info
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Min. Length | 428 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 654 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 32 mm. 30 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20065 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.29
Important compatibility info
| Min. Length | 422 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 692 mm |
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 20 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.29
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 45 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Centering Diameter | 70.7 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.31
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Max. Length | 510 mm |
| Min. Length | 316 mm |
| Pipe Diameter | 65 mm. 76 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Piston conrod diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.31
Important compatibility info
| Additional Information 2 | with spacer plate |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.32
Important compatibility info
| Length | 95 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.42
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 144 |
| Chain Type | Simplex, with chain lock |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (47638)
- 1x Febi Timing Chain (49479)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Gasket Set, cylinder head cover (100187)
- 1x Febi Bolt, camshaft gear (100183)
- 2x Febi Screw (100184)
- 1x Febi Bolt, camshaft gear (100185)
£118.43
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 12 645 237 S2 |
| Timing Chain Size | 134 E |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33047)
- 1x Febi Tensioner, timing chain (33048)
- 1x Febi Guide, timing chain (173744)
- 1x Febi Guide, timing chain (173888)
- 1x Febi Guide, timing chain (173891)
- 4x Febi Screw (33067)
- 3x Febi Screw (33068)
£118.50
Important compatibility info
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 2 kW |
| Number of Teeth | 9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Placement on Vehicle | Right |
| for OE number | 246 240 25 17 |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
| Voltage | 12 V |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Outer diameter | 173 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 4PK + 6PK |
| Number of Ribs | 3. 5 |
| Inner diameter | 37 mm |
| Width | 68 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle |
| Length | 539 mm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 49 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 507 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 100 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 46 mm |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Length | 700 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Length | 1243 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Length | 1042 mm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1360 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| External Thread Size | M12 x 1,5 |
| Rod/Strut | Guide Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.3 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.55
Important compatibility info
| Width | 100 mm |
| Outer diameter | 216 mm. 45 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.61
Important compatibility info
| Number of Holes | 6 |
| Placement on Vehicle | Front |
| Thickness | 12 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.65
Important compatibility info
| Outer diameter | 259 mm. 205 mm |
| Placement on Vehicle | Rear Axle |
| Function | Bellow, air suspension |
| Thickness | 510 mm. 138 mm |
| External Thread Size | M24 x 1,5, M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.65
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196593 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.65
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 72.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 73 mm |
| Number of mounting bores | 2 |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.68
Important compatibility info
| Belt Pulley Diameter | 56 mm |
| for OE number | 028 903 028 DX |
| Alternator Charge Current | 90 A |
| Function | Alternator |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.72
Important compatibility info
| External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 191 mm |
| Thickness | 194 mm. 600 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.87
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.95
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 104.5 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.97
Important compatibility info
| Width | 23 mm |
| Number of Teeth | 150 |
| Surface | Coated |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173220)
- 1x Febi Water Pump, engine cooling (15900)
£118.99
Important compatibility info
| Placement on Vehicle | steered leading axle |
| Outer diameter | 228 mm. 197 mm |
| Thickness | 193 mm. 493 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.01
Important compatibility info
| Type | Oxygen Sensor |
| Number of circuits | 4 |
| Cable Length | 625 mm |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.02
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 274 mm |
| Thickness | 88.2 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.03
Important compatibility info
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Inner diameter | 17 mm |
| Thickness | 65 mm |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Length | 283 mm |
| Width | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023