Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 4.12 kg |
| Replaces | 19205; 20047 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 695 mm |
| Min. Length | 425 mm |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.99
Important compatibility info
| Placement on Vehicle | Centre |
| Weight | 4.500 kg |
| Number of mounting bores | 4 |
| Mounting points diameter | 11 mm |
| Type | Manifold, exhaust system |
| Function | Manifold, exhaust system |
| Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.00
Important compatibility info
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 059 906 461 S |
| Number of Connectors / Ports | 5 |
| Weight | 0.20 kg |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.03
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 2.5 kg |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.06
Important compatibility info
| Weight | 2.785 kg |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Operating pressure to | 170 bar |
| Type | Hydraulic Pump, steering |
| for OE number | 2 064 855 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.07
Important compatibility info
| Length | 52 mm |
| Spanner Size | 27 |
| Function | Sensor, compressed-air system |
| External Thread Size | M16 x 1,5 |
| Weight | 0.040 kg |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.09
Important compatibility info
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Length | 2028 mm |
| Weight | 8.9 kg |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.15
Important compatibility info
| Height | 410 mm |
| Outer diameter | 325 mm |
| Inner diameter | 193 mm |
| Filter type | Filter Insert |
| Weight | 4.40 kg |
| Type | Air filter kit |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Weight | 4.87 kg |
| Placement on Vehicle | Driver side |
| Function | Repair Kit, kingpin |
| Extra Description | febi Plus |
| Type | Repair Kit, kingpin |
| Paired article numbers | 198303 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.24
Important compatibility info
| Inner diameter | 36 mm |
| Width | 170 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Weight | 2.459 kg |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.27
Important compatibility info
| Outer diameter | 560 mm |
| Thickness | 100 mm |
| Number of Wings | 6 |
| Function | Fan Wheel, engine cooling |
| Weight | 2.5 kg |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.39
Important compatibility info
| Weight | 3.10 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 686 mm |
| Min. Length | 411 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Function | Idler Arm |
| Placement on Vehicle | Front Axle |
| Spanner Size | 17 |
| Weight | 2.83 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Idler Arm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 2 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 82 mm |
| Weight | 5.98 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Number of Ribs | 5 |
| Width | 37 mm |
| Parameter | 6PK |
| Outer diameter | 138 mm |
| Inner diameter | 27 mm |
| Weight | 1.57 kg |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Number of Ribs | 6 |
| Function | Alternator |
| Alternator Charge Current | 75 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 5.0 kg |
| Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 75 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.9 kg |
| Current Strength | 75 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Weight | 0.4 kg |
| Length | 180 mm |
| Outer diameter | 35 mm |
| Inner diameter | 8 mm. 10 mm |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Cone Size | 28.6 mm |
| Weight | 10.300 kg |
| Length | 900 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.5 kg |
| Length | 925 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| Type | Mounting, engine |
| Weight | 5.060 kg |
| for OE number | 960 241 78 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Inner diameter | 68 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 115 mm |
| Outer diameter | 127 mm |
| Weight | 6.44 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with seal ring, with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (18417)
- 1x Febi Nut, kingpin (18203)
- 1x Febi Seal Ring, wheel hub (18471)
£128.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 73 mm |
| Outer diameter | 81 mm |
| Function | Wheel Bearing Kit |
| Weight | 4.18 kg |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Inner diameter | 27 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter 1 | 63 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 2 | 136 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Weight | 2.4 kg |
| Operating Mode | Manual |
| Type | Tilt Pump, driver cab |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Length | 900 mm |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Weight | 14.800 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 62 mm |
| Bolt / Nut Version | with ENKO® lock nut |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Weight | 0.165 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.47
Important compatibility info
| Width | 157 mm |
| Length | 178 mm |
| Placement on Vehicle | Right |
| Weight | 1.457 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Paired article numbers | 36749 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.51
Important compatibility info
| Additional Information | with holder |
| Voltage | 12 V |
| Additional Information 2 | with heating hoses |
| Function | Auxiliary water pump (cooling water circuit) |
| Weight | 0.43 kg |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.58
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197279 |
| Number of Connectors / Ports | 5. 2 |
| Weight | 1.5 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.61
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197280 |
| Number of Connectors / Ports | 5. 2 |
| Weight | 1.5 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.61
Important compatibility info
| Core Width | 815 mm |
| Material | Aluminium |
| Core Depth | 20 mm |
| Core Length | 343 mm |
| Function | Condenser, air conditioning |
| Type | Condenser, air conditioning |
| Weight | 2.818 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.63
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 644 mm |
| Min. Length | 384 mm |
| Pipe Diameter | 65 mm. 76 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Weight | 5.6 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.66
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Weight | 1.459 kg |
| Inner diameter | 28 mm |
| Outer diameter | 158 mm |
| Width | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.68
Important compatibility info
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Width | 120 mm |
| Height | 120 mm |
| Length | 520 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Diameter 1 | 60 mm |
| Type | Centre Rod Assembly |
| Weight | 8.000 kg |
| Adjustable | Adjustable |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.69
Important compatibility info
| Weight | 11.38 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 59.4 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.75
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1595 mm |
| Rod/Strut | Push Rod |
| Cone Size | 27 mm |
| Pipe Diameter | 40 mm |
| External Thread Size | M24 x 1,5 |
| Weight | 11.2 kg |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.81
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Placement on Vehicle | Rear Axle Left, Front Axle Right |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188118 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Placement on Vehicle | Rear Axle Right, Front Axle Left |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188117 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188174 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188173 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Inner diameter | 18 mm |
| Operating Mode | Hydraulic |
| Weight | 1.1405 kg |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Steering arm type | Trailing Arm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | both sides |
| Length | 625 mm |
| Hole Spacing | 115 mm |
| Weight | 10.8 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.87
Important compatibility info
| Weight | 9.675 kg |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Rod/Strut | Coupling Rod |
| Cone Size | 38 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.93
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.8 kg |
| Function | Bellow, air suspension |
| Thickness | 550 mm. 350 mm |
| Outer diameter | 227 mm. 240 mm |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.97
Important compatibility info
| Weight | 10.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 510 mm |
| Steering arm type | Trailing Arm |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.97
Important compatibility info
| Function | Starter |
| Rated Power | 2.0 kW |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Type | Starter |
| Weight | 5.61 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.98
Important compatibility info
| Weight | 9.0 kg |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M22 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 258 mm. 227 mm |
| Thickness | 290 mm. 500 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.05
Important compatibility info
| Weight | 1.585 kg |
| Bolt Hole Circle Diameter | 90 mm |
| Type | Vibration Damper, propshaft |
| Function | Vibration Damper, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Vibration Damper, propshaft (10643)
- 3x Febi Screw (03931)
- 3x Febi Screw (09110)
- 1x Febi Assembly Kit, propshaft joint (22117)
£129.22
Important compatibility info
| Weight | 1.099 kg |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.28
Important compatibility info
| Function | Starter |
| Rated Power | 2 kW |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Weight | 4.68 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023