Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.560 kg |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 92 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Paired article numbers | 186069 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 735 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Weight | 7.775 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Weight | 1.099 kg |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Length | 840 mm |
| Outer diameter | 52.0 mm |
| Rod/Strut | Push Rod |
| Outer thread | M27 x 1,5 mm |
| Driver Position | for left-hand drive vehicles |
| Weight | 9.42 kg |
| Inner thread | M30 x 1,5 RHT mm |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
£124.48
Important compatibility info
| Weight | 9.44 kg |
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.500 kg |
| Type | Mounting, engine |
| for OE number | 222 240 61 00 |
| Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.49
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Min. Length | 605 mm |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 76 mm |
| Weight | 4.680 kg |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.51
Important compatibility info
| External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
| Weight | 6.25 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 191 mm |
| Thickness | 194 mm. 600 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.54
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Weight | 1.150 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.57
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.60 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.59
Important compatibility info
| Height | 125 mm |
| Outer diameter | 94 mm |
| Function | Water Separator, fuel system |
| Weight | 0.285 kg |
| Type | Water Separator, fuel system |
| External Thread Size | M80 x 2,5 |
| Additional Information 2 | with sensor |
| Additional Information | with solenoid valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.60
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 188158 |
| External Teeth, Wheel Side | 29 |
| Weight | 9.317 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 950 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.63
Important compatibility info
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 615 mm |
| Number of Connectors / Ports | 3 |
| Weight | 0.74 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.65
Important compatibility info
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Length | 705 mm |
| Material | Steel |
| Steering arm type | Semi-trailing Arm |
| Weight | 11.550 kg |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.66
Important compatibility info
| Colour Coding | Yellow |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 2 |
| Type | Injector |
| Function | Injector |
| Additional Information | with gaskets/seals |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.66
Important compatibility info
| Placement on Vehicle | steered leading axle |
| Outer diameter | 228 mm. 197 mm |
| Thickness | 193 mm. 493 mm |
| Function | Bellow, air suspension |
| Weight | 7.3 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.69
Important compatibility info
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Weight | 3.026 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.70
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 4.312 kg |
| Stabiliser Diameter | 24 mm |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171101)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£124.80
Important compatibility info
| Rolling piston material | Plastic |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 201 mm |
| Thickness | 650 mm. 400 mm |
| Weight | 6.7 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.82
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 9.5 kg |
| Thickness | 192 mm. 526 mm |
| Outer diameter | 228 mm. 249 mm |
| Placement on Vehicle | Front Axle, non-steered leading axle |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.82
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023