Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Clutch Booster |
| Fill Medium | Brake Fluid (only DOT 3), Brake Fluid (only DOT 4) |
| Function | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.29
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183418 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.29
Important compatibility info
| Additional Information | with gasket/seal |
| Housing Type | without housing |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.30
Important compatibility info
| Function | Throttle body |
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 73 mm |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.30
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye |
| Max. Length | 748 mm |
| Min. Length | 473 mm |
| Pipe Diameter | 73.1 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 21 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.39
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 04L 109 119 D S10 |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (184814)
- 1x Febi Water Pump, engine cooling (103078)
£143.47
Important compatibility info
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.48
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with belt |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Toothed Belt, power take-off (104829)
- 1x Febi Oil Pump (47284)
£143.50
Important compatibility info
| Width | 30 mm |
| Belts | with rounded tooth profile |
| Number of Teeth | 150 |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. hydraulic belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (31725)
- 1x Febi Tensioner, timing belt (34610)
- 1x Febi Tensioner Pulley, timing belt (27004)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26982)
£143.64
Important compatibility info
| Length | 105 mm |
| Outer diameter | 75 mm |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.69
Important compatibility info
| Additional Information | with gaskets/seals, with oil cooler, with oil filter |
| Additional Information 2 | with screw set |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.76
Important compatibility info
| Thickness | 155 mm. 489 mm |
| External Thread Size | 1/4" - 18 NPT, 3/4" - 16 UNF, 1/2 " 13 UNC |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 286 mm. 258 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.78
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 285 mm |
| Thickness | 90 mm |
| Brake Disc Thickness | 35 mm |
| Minimum thickness | 33 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Centering Diameter | 104 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.98
Important compatibility info
| Pipe Diameter | 50 mm. 60 mm |
| Mounting points diameter | 20 mm. 24 mm |
| Max. Length | 705 mm |
| Min. Length | 435 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.99
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 880 mm |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Min. Length | 520 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.03
Important compatibility info
| Additional Information | with rubber mounts |
| Extra Description | ProKit |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| for OE number | 1K0 511 409 CB S1 |
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174324)
- 2x Febi Link/Coupling Rod, stabiliser bar (29461)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
£144.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 570 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, control/trailing arm (35324)
£144.06
Important compatibility info
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.11
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 110 |
| Timing Chain Size | G68HSF-6 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.19
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 1510 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.24
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 152 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (186258)
- 1x Febi Tensioner, timing chain (106191)
- 1x Febi Guide, timing chain (184986)
- 1x Febi Guide, timing chain (185060)
£144.24
Important compatibility info
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.24
Important compatibility info
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.28
Important compatibility info
| Function | Fifth Wheel Kingpin |
| Diameter | 2 Inch |
| Fulfils ECE norm | E1 R55 |
| Type | Fifth Wheel Kingpin |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fifth Wheel Kingpin (03437)
- 1x Febi Backplate, fifth wheel kingpin (03439)
- 8x Febi Screw (03436)
£144.28
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.28
Important compatibility info
| for OE number | 471 205 06 06 |
| Type | Fan Wheel, engine cooling |
| Function | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.28
Important compatibility info
| Belt Pulley Diameter | 82 mm |
| Number of Ribs | 1 |
| Voltage | 12 V |
| Alternator Charge Current | 65 A |
| Type | Alternator |
| Function | Alternator |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.28
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle |
| Length | 1140 mm |
| Stabiliser Diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.29
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.29
Important compatibility info
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 270 mm. 808 mm |
| Outer diameter | 260 mm. 286 mm |
| External Thread Size | M12 x 1,75, M16 x 2, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£144.33
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023