Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with spacer plate |
| Length | 247 mm |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.27
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 881 mm |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Bore Diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.29
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.41
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 395 mm |
| Min. Length | 275 mm |
| Pipe Diameter | 69.5 mm. 75 mm |
| Mounting points diameter | 30 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.42
Important compatibility info
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.46
Important compatibility info
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Width | 58 mm |
| Outer diameter | 194 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 8 |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32219)
- 1x Febi Centering Bolt, crankshaft pulley (33612)
- 1x Febi Washer, crankshaft pulley (33587)
£151.51
Important compatibility info
| Width | 44 mm |
| Inner diameter | 94 mm |
| Number of Ribs | 6. 8 |
| Outer diameter 1 | 168 mm |
| Parameter | 4PK + 6PK |
| Outer diameter 2 | 144 mm |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.51
Important compatibility info
| Additional Information | with gaskets/seals |
| Heating / Cooling | without breather valve |
| Material | Aluminium |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Cover (108262)
- 1x Febi Gasket, cylinder head cover (36708)
- 4x Febi Seal, injector shaft (36166)
£151.62
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 564 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 58 mm |
| Mounting points diameter | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.62
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 220 mm |
| Inner diameter | 41 mm |
| Placement on Vehicle | Front |
| Hole Spacing | 193 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.63
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.67
Important compatibility info
| Stabiliser Diameter | 22.9 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with coupling rod |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174338)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£151.71
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
| Connector Shape | angular |
| Type | Sensor, accelerator pedal position |
| Function | Sensor, accelerator pedal position |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.75
Important compatibility info
| Placement on Vehicle | Rear |
| Function | Door Lock, driver cab |
| Type | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.86
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 102 |
| Timing Chain Size | G68HSF |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.92
Important compatibility info
| Extra Description | febi Plus |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.93
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 105 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.97
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| for OE number | 11 12 7 611 277 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.97
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.02
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 59 mm |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.05
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 53 mm |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.08
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with oil sump gasket |
| Additional Information | with oil drain plug |
| Length | 475 mm |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Type | Oil sump |
| Function | Oil sump |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.10
Important compatibility info
| Outer diameter | 420 mm |
| Number of Teeth | 10 |
| Type | Clutch Disc |
| Function | Clutch Disc |
| Replaces | 105005 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.16
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.16
Important compatibility info
| Function | V-Ribbed Belt Set |
| Length 1 | 1512 mm |
| Number of ribs 2 | 8 |
| Type | V-Ribbed Belt Set |
| Additional Information | with clamping elements |
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
| Length 2 | 1538 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29063)
- 1x Febi V-Ribbed Belt (40706)
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Belt Tensioner, v-ribbed belt (27117)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
£152.17
Important compatibility info
| Length 1 | 1512 mm |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Units / Pulleys | incl. deflection pulley |
| Length 2 | 1515 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
| Additional Information | with clamping elements |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29123)
- 1x Febi V-Ribbed Belt (40706)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Belt Tensioner, v-ribbed belt (27117)
£152.19
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| for OE number | 51.03905.0177 S2 |
| Number of screws | 18 |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.19
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 120 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48286)
- 1x Febi Tensioner, timing chain (101149)
- 1x Febi Guide, timing chain (107854)
- 1x Febi Guide, timing chain (107855)
- 1x Febi Gear/Sprocket, camshaft (101157)
£152.21
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 7 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
| for OE number | 12 08 086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.40
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Placement on Vehicle | Front Axle |
| Min. Length | 357 mm |
| Pipe Diameter | 56 mm. 50 mm |
| Shock Absorber Type | Oil Pressure |
| External Thread Size | M12 x 1,5 |
| Max. Length | 617 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.42
Important compatibility info
| Outer diameter | 110 mm |
| Width | 115 mm |
| Inner diameter | 58 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle, Steered trailing axle |
| Additional Information 2 | with shaft seal, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.51
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Outer diameter | 158 mm |
| Inner diameter | 38 mm |
| Width | 157 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 6 PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.61
Important compatibility info
| Height | 631 mm |
| Outer diameter | 355 mm |
| Inner diameter | 139 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.62
Important compatibility info
| for OE number | 059 145 950 R |
| Type | Throttle body |
| Function | Throttle body |
| Voltage | 12 V |
| Operating Mode | Electric |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.65
Important compatibility info
| Length | 150 mm |
| Width | 140 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Hub, engine cooling fan wheel |
| Function | Hub, engine cooling fan wheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.69
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (101080)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (170711)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Oil Filter (49868)
- 1x Febi Fuel filter (31397)
£152.69
Important compatibility info
| Number of Teeth | 11 |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 185 bar |
| Rotation Direction | Anticlockwise rotation |
| Additional Information | with gasket/seal |
| for OE number | 003 460 61 80 S1 |
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 11 mm |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Pump, steering (100161)
- 1x Febi Seal, servo pump (180084)
£152.83
Important compatibility info
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| Additional Information | with adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.02
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.08
Important compatibility info
| Paired article numbers | 48102 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.15
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 195 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley, incl. guide pulleys |
| for OE number | 0816.K2 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (101047)
- 1x Febi Tensioner Pulley, timing belt (29301)
- 2x Febi Deflection Pulley/Guide Pulley, timing belt (100349)
£153.15
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 8 |
| Pulleys | without belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 79 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.17
Important compatibility info
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Length | 610 mm |
| Material | Steel |
| Hole Spacing | 152 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.17
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 12 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 69 mm |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.25
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.26
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 153 mm |
| Thickness | 111 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Inner diameter | 38 mm |
| Width | 85 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.31
Important compatibility info
| Outer diameter | 395 mm |
| Number of Teeth | 10 |
| for OE number | 1703 739 |
| Type | Clutch Disc |
| Function | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.38
Important compatibility info
| Thickness | 33 mm |
| Inner diameter | 30 mm |
| Parameter | 5PK |
| Number of Ribs | 4 |
| Outer diameter | 153 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.46
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023