Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M14 x 2 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 42147 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.57
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 230 mm |
| Thickness | 167 mm. 527 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.62
Important compatibility info
| Steering arm type | Trailing Arm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | both sides |
| Length | 625 mm |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.68
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Bearing Type | Cylindrical Roller Bearing |
| Inner diameter | 30 mm |
| Width | 20 mm |
| Type | Repair Set, propshaft centre bearing |
| Hole Spacing | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (38548)
- 1x Febi Boot, propshaft (100491)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38758)
£127.70
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 52 mm |
| Length | 1512 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M35 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Rod/Strut | Coupling Rod |
| Cone Size | 38 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.74
Important compatibility info
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.80
Important compatibility info
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 23.2 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171116)
- 2x Febi Link/Coupling Rod, stabiliser bar (102810)
£127.84
Important compatibility info
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Min. Length | 400 mm |
| Max. Length | 615 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.90
Important compatibility info
| External Thread Size | M14 x 2, M10 x 1 |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Fork |
| Max. Length | 382 mm |
| Pipe Diameter | 62 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.94
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Outer diameter | 241 mm. 257 mm |
| Thickness | 690 mm. 275 mm |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.94
Important compatibility info
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.94
Important compatibility info
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.94
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.94
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185905 |
| Cone Size 2 | 28 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.97
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | both sides |
| for OE number | 629 241 02 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.00
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 875 mm |
| Min. Length | 520 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Replaces | 20022 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.02
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Operating pressure to | 170 bar |
| Type | Hydraulic Pump, steering |
| for OE number | 2 064 855 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.15
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 776 mm |
| Min. Length | 456 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.15
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Max. Length | 679 mm |
| Min. Length | 427 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Front Axle |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 60 mm. 50 mm |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Function | Tilt Pump, driver cab |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Hole Spacing | 75 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Module |
| Function | EGR Module |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi EGR Module (100562)
- 1x Febi Gasket, EGR valve (170319)
- 1x Febi Gasket, EGR valve (170332)
- 1x Febi Gasket, exhaust pipe (170580)
£128.17
Important compatibility info
| Height | 410 mm |
| Outer diameter | 325 mm |
| Inner diameter | 193 mm |
| Filter type | Filter Insert |
| Type | Air filter kit |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 790 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 51 mm. 45 mm |
| Min. Length | 470 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.19
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 573 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 63.5 mm. 73 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.28
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| for OE number | 03C 115 105 T |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.29
Important compatibility info
| Function | Intermediate Steering Lever |
| Placement on Vehicle | Front Axle |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Intermediate Steering Lever |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Placement on Vehicle | Left, Right |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 70. 98 |
| Timing Chain Size | G68VCO, G68V |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (25240)
- 1x Febi Chain, intermediate shaft (09585)
- 1x Febi Timing Chain (25404)
- 1x Febi Tensioner, timing chain (32786)
- 1x Febi Guide, timing chain (25222)
- 1x Febi Guide, timing chain (49229)
- 1x Febi Guide, timing chain (49231)
- 1x Febi Guide, timing chain (45731)
£128.43
Important compatibility info
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Number of Teeth | 153 |
| Type | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28107)
- 1x Febi Water Pump, engine cooling (21877)
£128.43
Important compatibility info
| Function | Connecting Rod |
| Type | Connecting Rod |
| for OE number | 51.02400.6279 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023