Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 77 00 109 812 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.88
Important compatibility info
| Alternator Charge Current | 110 A |
| Pulleys | with freewheel belt pulley |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Function | Alternator |
| Type | Alternator |
| Current Strength | 110 A |
| Belt Pulley Diameter | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.20
Important compatibility info
| Paired article numbers | 48102 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Alternator Charge Current | 140 A |
| Pulleys | with freewheel belt pulley |
| Function | Alternator |
| Type | Alternator |
| Number of Ribs | 5 |
| Voltage | 12 V |
| Belt Pulley Diameter | 56 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Length | 150 mm |
| Width | 140 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Hub, engine cooling fan wheel |
| Function | Hub, engine cooling fan wheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Housing, oil cooler |
| Width | 265 mm |
| Length | 465 mm |
| Type | Housing, oil cooler |
| Thickness | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 682 mm |
| Width | 80 mm |
| Spring Design | Leaf spring |
| Number of spring leaves | 1 |
| Type | Spring Pack |
| Function | Spring Pack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Seal Material | Rubber/Metal |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of grooves | 5 |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Pulleys | with belt pulley |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 105 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Width | 25.9 mm |
| Outer diameter | 115.5 mm |
| Inner diameter | 14 mm |
| Number of Teeth | 46 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.38
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 395 mm |
| Min. Length | 275 mm |
| Pipe Diameter | 69.5 mm. 75 mm |
| Mounting points diameter | 30 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.42
Important compatibility info
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.46
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 1375 mm |
| Additional Information | with nuts |
| Outer diameter | 62 mm |
| Thread Length | 98 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.65
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.69
Important compatibility info
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 1 |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.70
Important compatibility info
| Voltage | 12 V |
| for OE number | 5N0 965 561 A |
| Number of Connectors / Ports | 3 |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.74
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Cable Length | 406 mm |
| Type | NOx Sensor, NOx catalytic converter |
| Function | NOx Sensor, NOx catalytic converter |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.90
Important compatibility info
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Min. Length | 530 mm |
| Pipe Diameter | 80 mm. 71 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear Axle |
| Max. Length | 892 mm |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20228 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.95
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 16 mm |
| Max. Length | 853 mm |
| Min. Length | 504 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.95
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 862 mm |
| Min. Length | 519 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.95
Important compatibility info
| Outer diameter | 143 mm |
| Width | 143 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Inner diameter | 30 mm |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.11
Important compatibility info
| Outer diameter | 420 mm |
| Number of Teeth | 10 |
| Type | Clutch Disc |
| Function | Clutch Disc |
| Replaces | 105005 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.16
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.16
Important compatibility info
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 188 |
| Timing Chain Size | G68VCO |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25167)
- 1x Febi Guide, timing chain (47399)
- 1x Febi Tensioner, timing chain (01583)
- 1x Febi Seal Ring (05552)
- 1x Febi Guide, timing chain (44623)
- 1x Febi Guide, timing chain (47387)
£152.16
Important compatibility info
| Additional Information 2 | with spacer plate |
| Length | 247 mm |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.19
Important compatibility info
| Length 1 | 1512 mm |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Units / Pulleys | incl. deflection pulley |
| Length 2 | 1515 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
| Additional Information | with clamping elements |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29123)
- 1x Febi V-Ribbed Belt (40706)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Belt Tensioner, v-ribbed belt (27117)
£152.19
Important compatibility info
| Belt Pulley Diameter | 70 mm |
| Type | Alternator |
| Alternator Charge Current | 130 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Number of Ribs | 7 |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.19
Important compatibility info
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Length | 128 mm |
| Height | 129 mm |
| Width | 128 mm |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Length | 610 mm |
| Pipe Diameter | 50 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 152/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.21
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023