Important compatibility info
| Width of castor bearing surface | 46 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 78 mm |
| Current Strength | 105 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 93.5 mm |
| Wheel Sided Joint Diameter | 102.8 mm |
| External Teeth, Diff.Side | 28 |
| Min. Length | 1028 mm |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 126 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (26374)
- 1x Febi Guide, timing chain (30546)
- 1x Febi Guide, timing chain (30547)
- 1x Febi Tensioner, timing chain (30548)
- 1x Febi Gasket, timing case (102340)
- 1x Febi Seal Ring, oil drain plug (04054)
- 1x Febi Screw Plug, oil sump (46332)
- 2x Febi Screw (100646)
Important compatibility info
| Inner diameter 1 | 110 mm |
| Inner diameter 2 | 100 mm |
| Outer diameter 1 | 170 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width 1 | 47 mm |
| Outer diameter 2 | 157 mm |
| Width 2 | 42 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| for OE number | 940 350 03 35 S1 |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Wheel Bearing (23314)
- 1x Febi Wheel Bearing (45806)
Important compatibility info
| Bore Diameter | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm, Control Arm |
| Number of Holes | 4 |
| Material | Steel |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 68 |
| Placement on Vehicle | Lower |
| Function | Timing Chain Kit |
| Timing Chain Size | G67HP, G67HR |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25380)
- 1x Febi Guide, timing chain (24894)
- 1x Febi Guide, timing chain (24943)
- 1x Febi Tensioner, timing chain (21271)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 596 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without sensor |
| Colour | Black |
| Number of Connectors / Ports | 4. 6 |
| Extra Description | febi Plus |
| Function | Clock Spring, airbag |
| Type | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 239 |
| Width | 25.4 mm |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14640)
- 1x Febi Water Pump, engine cooling (18896)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 570 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, control/trailing arm (35324)
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Replaces | 39593 |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HP, G68HR |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (38014)
- 1x Febi Guide, timing chain (30257)
- 1x Febi Tensioner, timing chain (25408)
- 2x Febi Gear/Sprocket, camshaft (39526)
- 1x Febi Timing Chain (25444)
Important compatibility info
| Cone Size | 24 mm |
| Pipe Diameter | 56 mm |
| Adjustable | Adjustable on one side |
| Internal Thread Size | M30 x 1,5 |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle, outer |
| Length | 1064 mm |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Function | Centre Rod Assembly |
| Cone Size 2 | 29 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 3 |
| Operating Mode | Hydraulic |
| Inner diameter | 20 mm |
| Internal Thread Size | M16 x 1,5 |
| Operating pressure to | 11 bar |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 8 |
| Operating Mode | Electric |
| Lock System | with double sealing |
| Placement on Vehicle | Left Front |
| Additional Information | with adjuster |
| Paired article numbers | 178561 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Width | 120 mm |
| Height | 120 mm |
| Length | 520 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Diameter 1 | 60 mm |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 580 mm |
| Material | Steel |
| Outer diameter | 396 mm |
| Number of Connectors / Ports | 4 |
| Capacity | 60 l |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Operating Pressure | 10 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 182947 |
| Brake caliper piston diameter | 41 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Iron |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Iron |
| Paired article numbers | 182946 |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Placement on Vehicle | Rear Axle Left, Front Axle Right |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188118 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Placement on Vehicle | Rear Axle Right, Front Axle Left |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188117 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188174 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188173 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Housing material | Cast Aluminium |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 5 0436 1204 |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 78 mm |
| Outer diameter | 217 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 158 |
| Type | Timing Chain Kit |
| Number of markings | 3 |
| Function | Timing Chain Kit |
| for OE number | 24321-2B000 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (171414)
- 1x Febi Tensioner, timing chain (170729)
- 1x Febi Guide, timing chain (171415)
- 1x Febi Guide, timing chain (171416)
Important compatibility info
| Additional Information | with piston |
| External Thread Size | M10 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 227 mm. 225 mm |
| Thickness | 223 mm. 531 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 2 |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 210 mm |
| Thickness | 203 mm. 675 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1231 mm |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (183223)
- 1x Febi Belt Tensioner, v-ribbed belt (184025)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (182534)
Important compatibility info
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Pipe Diameter | 44 mm |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Additional Information | with nuts |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 53 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 110 A |
| Belt Pulley Diameter | 47 mm |
| Current Strength | 110 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without sensor |
| Type | Housing, fuel filter |
| External Thread Size | M14 x 1, M32 x 1,5 |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Fill Medium | Mineral Oil |
| Function | Clutch Booster |
| Type | Clutch Booster |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Max. Length | 700 mm |
| Min. Length | 455 mm |
| Pipe Diameter | 63 mm. 76 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Piston conrod diameter | 19 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
| Belt Pulley Diameter | 76 mm |
| Number of Ribs | 2 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Number of Connectors / Ports | 4 |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side |
| Number of Teeth | 46 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 90 mm |
| Type | Vibration Absorber, propshaft |
| Function | Vibration Absorber, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Vibration Absorber, propshaft (10643)
- 3x Febi Screw (03931)
- 3x Febi Screw (09110)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Width of castor bearing surface | 31.5 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 934 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 177 mm |
| Placement on Vehicle | Rear |
| Number of Holes | 6 |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 1315 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 108 mm |
| Height | 78 mm |
| Width | 117 mm |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 182353 |
| Colour | Silver |
| Type | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 184955 |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 23 |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 949 mm |
| External Teeth, Diff.Side | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| for OE number | 18011-R1A- A00 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































