Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 110 mm |
| Material | Aluminium |
| Outer diameter | 63 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.83
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.85
Important compatibility info
| Belt Pulley Diameter | 54 mm |
| Voltage | 12 V |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.87
Important compatibility info
| Function | Multi-Function Switch |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Combi Switch Function | Window Regulator |
| Type | Multi-Function Switch |
| Placement on Vehicle | Passenger Side |
| Number of Connectors / Ports | 9. 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.88
Important compatibility info
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.08
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.11
Important compatibility info
| Function | Camshaft |
| for OE number | 13 02 053 58R |
| Type | Camshaft |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.11
Important compatibility info
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 61 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.12
Important compatibility info
| Length | 600 mm |
| Multi-piece | one-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.12
Important compatibility info
| Operating pressure to | 12 bar |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 4 |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Inner diameter | 17 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.18
Important compatibility info
| Outer diameter | 430 mm |
| Number of Teeth | 10 |
| for OE number | 0 0190 4711 |
| Type | Clutch Disc |
| Function | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.22
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 500 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.25
Important compatibility info
| Operating Mode | Electric |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Length | 894 mm |
| Number of Ribs | 6 |
| Additional Information | with clamping elements |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38432)
- 1x Febi Belt Tensioner, v-ribbed belt (102601)
- 1x Febi Belt Tensioner, v-ribbed belt (33136)
- 1x Febi Plug (173377)
- 1x Febi Cap (174341)
£160.30
Important compatibility info
| for OE number | 03C 145 140 E S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 187831 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.32
Important compatibility info
| Paired article numbers | 48101 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.33
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Paired article numbers | 176915 |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.38
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Paired article numbers | 176914 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.38
Important compatibility info
| Pipe Diameter | 50 mm |
| Mounting points diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Length | 595 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.49
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 8 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 62 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.55
Important compatibility info
| Operating Mode | Electronic |
| for OE number | 2 395 420 |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.58
Important compatibility info
| Length | 1122 mm |
| Number of Ribs | 8 |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (179891)
- 1x Febi Belt Tensioner, v-ribbed belt (176489)
£160.59
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.64
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.68
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Width | 73 mm |
| Outer diameter | 153 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.69
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 10 |
| Rated Power | 4 kW |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.80
Important compatibility info
| Type | Starter |
| Voltage | 24 V |
| for OE number | 51.26201.7213 |
| Function | Starter |
| Number of Teeth | 11 |
| Rated Power | 4 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.80
Important compatibility info
| Weight | 1.600 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 116 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G67HP |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (38185)
- 1x Febi Tensioner, timing chain (30511)
- 1x Febi Guide, timing chain (30465)
- 1x Febi Guide, timing chain (38184)
- 1x Febi Gear/Sprocket, camshaft (25469)
- 1x Febi Sprocket, crankshaft (25470)
£160.83
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Stabiliser Diameter | 33 mm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171136)
- 1x Febi Link/Coupling Rod, stabiliser bar (21357)
- 1x Febi Link/Coupling Rod, stabiliser bar (21358)
- 2x Febi Screw (22248)
- 4x Febi Nut (06877)
£160.86
Important compatibility info
| Number of Connectors / Ports | 2 |
| Thickness | 147 mm |
| Function | Interior Blower |
| Outer diameter | 149.5 mm |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.88
Important compatibility info
| Mounting points diameter | 9 mm |
| Function | Oil Cooler, engine oil |
| Length | 252 mm |
| Height | 135 mm |
| Width | 148 mm |
| Internal Thread Size | M10 x 1,5 |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.93
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023