Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.27 kg |
| Outer diameter | 38.5 mm |
| Opening Temperature | 90 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.35
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Weight | 6.3 kg |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.35
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 5.9 kg |
| Current Strength | 80 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.35
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Paired article numbers | 104398 |
| Weight | 2.277 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.38
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 650 mm |
| Steering arm type | Trailing Arm |
| Hole Spacing | 130 mm |
| Weight | 13.4 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Combi Switch Function | with indicator function, with rear wipe-wash function, with wipe-wash function, with high beam function, with light dimmer function |
| Type | Steering Column Switch |
| Weight | 0.507 kg |
| Function | Steering Column Switch |
| for OE number | 735622186 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2 kW |
| Weight | 4.7 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Bolt Hole Circle Diameter | 245 mm |
| Inner diameter | 140 mm |
| Weight | 12.140 kg |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 290 mm |
| Width | 290 mm |
| Type | Wheel Hub |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 134 |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| Weight | 0.982 kg |
| for OE number | 13506-37040 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49728)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (174609)
- 1x Febi Guide, timing chain (109450)
£133.39
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Timing Chain Size | Z53AI-3 |
| Number of Chain Links | 140 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Weight | 0.854 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (172273)
- 1x Febi Tensioner, timing chain (180602)
- 1x Febi Guide, timing chain (174873)
- 1x Febi Guide, timing chain (174874)
- 1x Febi Guide, timing chain (174880)
£133.39
Important compatibility info
| Weight | 0.177 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| for OE number | 23796-JK24B |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Placement on Vehicle | Left |
| Height | 150 mm |
| Width | 400 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193029 |
| Port / Connector type | ASS4 7 pin |
| Number of Connectors / Ports | 6 |
| Light Function | with indicator, with stop light, with reverse light, with rear fog light, with reflector (triangular), with side marker light, with taillight (LED), without number plate light |
| Weight | 1.3 kg |
| Depth | 120 mm |
| Protection Type (IP Code) | IP56K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R10, R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Number of Ribs | 7 |
| Length | 1190 mm |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt Set |
| Weight | 1.283 kg |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184952)
- 1x Febi Belt Tensioner, v-ribbed belt (183536)
£133.39
Important compatibility info
| Pulleys | with belt pulley |
| Weight | 0.6 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Material | Aluminium |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Length | 903 mm |
| Cone Size | 28.6 mm |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Weight | 10.400 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Inner diameter 1 | 14 mm |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Inner diameter 2 | 16 mm |
| Weight | 2.000 kg |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Weight | 5.8 kg |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Voltage | 24 V |
| Weight | 3.42 kg |
| Control Range | 0,7+0,5 bar |
| Type | Air Dryer, compressed-air system |
| Rated Power | 100 W |
| Function | Air Dryer, compressed-air system |
| Cut-off Pressure | 8,5 bar |
| Additional Information 2 | with dryer, with integrated oil separator |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M32 x 1,5 |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Cone Size | 30.2 mm |
| Weight | 16.440 kg |
| Rod/Strut | Push Rod |
| Length | 1217 mm |
| Placement on Vehicle | Front Axle |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Weight | 10.491 kg |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal, Rubber |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 541 200 14 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Material | FVMQ [fluorosilicone rubber) |
| Additional Information 2 | with quick couplers |
| Inner diameter | 46 mm |
| Weight | 0.629 kg |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Width | 22 mm |
| Outer diameter | 126 mm |
| Inner diameter | 17 mm |
| Weight | 0.910 kg |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Additional Information 2 | with integrated oil separator, with dryer |
| Voltage | 24 V |
| Rated Power | 100 W |
| Weight | 3.4 kg |
| Control Range | 0,9+0,7 bar |
| Type | Air Dryer, compressed-air system |
| Cut-off Pressure | 12 bar |
| Function | Air Dryer, compressed-air system |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Type | Hub, engine cooling fan wheel |
| Function | Hub, engine cooling fan wheel |
| Weight | 3.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.45
Important compatibility info
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Paired article numbers | 40129 |
| Additional Information 2 | with bearing |
| Outer diameter | 53 mm |
| Length | 235 mm |
| Placement on Vehicle | both sides |
| Type | Repair Kit, kingpin |
| Weight | 4.287 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (40730)
- 1x Febi Lock Ring, steering knuckle (40731)
- 1x Febi Lock Ring, steering knuckle (40736)
- 1x Febi Seal Ring, steering knuckle (40738)
- 1x Febi Seal Ring, steering knuckle (40737)
- 1x Febi O-Ring Repair Set (40739)
- 1x Febi Lock Ring, steering knuckle (40740)
- 4x Febi Screw (40741)
- 2x Febi Repair Kit, kingpin (40742)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (06635)
- 1x Febi Spacer, kingpin (46436)
- 1x Febi Spacer, kingpin (46437)
- 1x Febi Spacer, kingpin (46438)
- 1x Febi Spacer, kingpin (46439)
- 1x Febi Spacer, kingpin (46440)
- 1x Febi Spacer, kingpin (46441)
£133.52
Important compatibility info
| Function | Vacuum Pump, braking system |
| Weight | 1.420 kg |
| Additional Information | with gasket/seal |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.57
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 668 mm |
| Steering arm type | Trailing Arm |
| Bore Diameter | 19 mm |
| Weight | 11.060 kg |
| Hole Pitch 1/ Hole Pitch 2 | 130/130 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.61
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.100 kg |
| External Teeth, Diff.Side | 29 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 809 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.71
Important compatibility info
| Weight | 2.828 kg |
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.72
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 230 mm |
| Thickness | 167 mm. 527 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 8.2 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023