Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Oil Pump |
| Timing Chain Size | G68V |
| Type | Oil Pump |
| Additional Information | with oil pump chain, with slide rail |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (19062)
- 1x Febi Chain, oil pump drive (09442)
- 1x Febi Rail, oil pump drive chain (25302)
£149.23
Important compatibility info
| Number of Teeth | 11 |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 185 bar |
| Rotation Direction | Anticlockwise rotation |
| Additional Information | with gasket/seal |
| for OE number | 003 460 61 80 S1 |
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 11 mm |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Pump, steering (100161)
- 1x Febi Seal, servo pump (180084)
£149.23
Important compatibility info
| Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Outer diameter | 79.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Inner diameter | 14.2 mm |
| Paired article numbers | 182262 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| for OE number | 213 333 09 00 |
| Caster correction | +3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 152 mm |
| Steering arm type | Trailing Arm |
| Length | 605 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Additional Information | with gasket/seal, with fuel sender unit |
| Function | Fuel Feed Unit |
| Pipe Diameter | 8 mm |
| Type | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.24
Important compatibility info
| Width of castor bearing surface | 32 mm |
| Width | 120 mm |
| Outer diameter | 90 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.36
Important compatibility info
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 723 mm |
| Min. Length | 443 mm |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| for OE number | 006 326 60 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.39
Important compatibility info
| Length | 585 mm |
| Hole Spacing | 152 mm |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.44
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.57
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 635 mm |
| Min. Length | 386 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20348 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.65
Important compatibility info
| Thickness | 630 mm. 161 mm |
| Type | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 227 mm. 260 mm |
| Additional Information | with piston rod, with piston |
| Function | Bellow, air suspension |
| External Thread Size | 1/2" - 13 UNC, 3/4" - 16 UNF, 1/4" - 18 NPTF |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.76
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 21.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.83
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.83
Important compatibility info
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 342 mm |
| Thickness | 64.6 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.91
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Placement on Vehicle | Front Axle |
| Min. Length | 357 mm |
| Pipe Diameter | 56 mm. 50 mm |
| Shock Absorber Type | Oil Pressure |
| External Thread Size | M12 x 1,5 |
| Max. Length | 617 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.97
Important compatibility info
| Function | Shock Absorber |
| Mounting points diameter | 16 mm. 20 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Max. Length | 804 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Piston conrod diameter | 16 mm |
| Min. Length | 485 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.97
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | BE4R |
| Inner length 1 | 986 mm |
| Outer length 1 | 1018 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.09
Important compatibility info
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 105907 |
| Function | Window Regulator |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.10
Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Paired article numbers | 105906 |
| Function | Window Regulator |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.10
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.11
Important compatibility info
| Number of Teeth | 46 |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| for OE number | 25203205 |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.13
Important compatibility info
| Extra Description | Standard Medium Kit |
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Timing Chain Size | G67HR |
| for sprocket height (incl. body) | 33 mm |
| Type | Timing Chain Kit |
| Thickness | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30668)
- 1x Febi Tensioner, timing chain (101097)
- 1x Febi Guide, timing chain (101098)
- 1x Febi Guide, timing chain (101099)
- 1x Febi Gear/Sprocket, camshaft (25469)
- 1x Febi Sprocket, crankshaft (101101)
- 3x Febi Bolt, camshaft gear (180594)
- 3x Febi Bolt, camshaft gear (180595)
£150.18
Important compatibility info
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| Additional Information | with adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.19
Important compatibility info
| Hole Spacing | 130 mm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 40 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 515 mm |
| Steering arm type | Trailing Arm |
| Mounting points diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.22
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 383 mm |
| Min. Length | 291 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.22
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Width | 73 mm |
| Outer diameter | 153 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.22
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 62 mm |
| Max. Length | 347 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.22
Important compatibility info
| Steering arm type | Control Arm, Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | both sides, Rear Axle Lower |
| Length | 602 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.22
Important compatibility info
| Additional Information 2 | without screw |
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Extra Description | febi Plus |
| Number of Teeth | 54 |
| Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023