Important compatibility info
External Teeth, Diff.Side | 22 |
Min. Length | 605 mm |
Thread Size | M20x1,5 |
Type | Drive Shaft |
External Teeth, Wheel Side | 25 |
Wheel Sided Joint Diameter | 76.4 mm |
Transmission-side joint diameter | 76 mm |
Weight | 4.680 kg |
Function | Drive Shaft |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Length | 1805 mm. 940 mm |
Placement on Vehicle | Left Rear, Right Rear |
Weight | 0.63 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 51 mm |
Inner diameter | 14.1 mm |
Weight | 0.394 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Outer diameter | 55.1 mm |
Placement on Vehicle | Front, Front Axle Right, Front Axle Left |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper |
Additional Information | with rubber-metal mounts |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 194999 |
Weight | 4.012 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Lower Front Axle |
Material | Rubber/Metal |
Outer diameter | 32 mm. 26 mm |
Thickness | 46 mm |
Weight | 0.372 kg |
Type | Mounting, control/trailing arm |
for OE number | 77 04 000 681 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Mounting, control/trailing arm (09146)
Important compatibility info
Rod/Strut | Push Rod |
Thread Size | M20 x 1,5, M24 x 1,5 |
Pipe Diameter | 38 mm |
Additional Information 2 | with crown nut |
Placement on Vehicle | Front Axle |
Adjustable | Adjustable on one side |
Cone Size | 26 mm. 30 mm |
Weight | 4.650 kg |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.67 kg |
Placement on Vehicle | Wheel Side, Front Axle |
Length | 106 mm |
Material | Thermoplast |
Inner diameter 2 | 81 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48927)
- 1x Febi Clamping Clip (29821)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Weight | 0.865 kg |
Type | Repair Kit, brake camshaft |
Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Material | Steel |
Outer diameter | 30.2 mm |
Thickness | 37 mm |
Spanner Size | 21 |
Surface | Zinc-coated |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10 |
Wheel Fastening | Conical Seat F |
Function | Wheel Nut |
Rims | for light alloy rims, for steel rims |
Weight | 0.072 kg |
Type | Wheel Nut |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.6 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 116 |
Timing Chain Size | Z53R |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Recirculation Pump, parking heater |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Weight | 0.22 kg |
Type | Water Recirculation Pump, parking heater |
Replaces | 174489 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Compressor, compressed-air system |
Weight | 14.250 kg |
Type | Compressor, compressed-air system |
for OE number | 906 130 62 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with lid |
Weight | 0.548 kg |
Tightening Torque | 85 Nm |
Width | 37.8 mm |
Outer diameter | 59.9 mm |
Inner diameter | 17 mm |
Function | Alternator Freewheel Clutch |
Type | Alternator Freewheel Clutch |
Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Length | 815 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 1.340 kg |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Outer diameter | 20 mm |
Function | Mounting, control/trailing arm |
Length | 60.9 mm |
Type | Mounting, control/trailing arm |
Weight | 0.24 kg |
Thickness | 61 mm |
Inner diameter | 12.3 mm |
Material | Rubber/Metal |
Width | 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.3 kg |
Placement on Vehicle | Rear Axle |
Length | 840 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 50 mm |
Mounting points diameter | 20 mm |
Function | Control/Trailing Arm, wheel suspension |
Internal Thread Size | M30 x 1,5 RHT |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ignition Coil |
Number of Connectors / Ports | 3 |
Voltage | 12 V |
Weight | 0.270 kg |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Coolant Pipe |
Cooling Hose | from engine to thermostat |
Weight | 0.014 kg |
Extra Description | febi Plus |
Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.236 kg |
Height | 102 mm |
Width | 24 mm |
Port / Connector type | DIN Connector |
DIN / ISO | 72591 |
Number of circuits | 2 |
Type | Holder, rotating beacon |
Function | Holder, rotating beacon |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023