Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M18x1,5 |
External Teeth, Wheel Side | 25 |
Weight | 4.534 kg |
External Teeth, Diff.Side | 22 |
Min. Length | 640 mm |
Wheel Sided Joint Diameter | 80 mm |
Transmission-side joint diameter | 69 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 35 mm |
Outer diameter 1 | 45 mm |
Width 1 | 17 mm |
Outer diameter 2 | 60 mm |
Width 2 | 17 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Replaces | 07829 |
Weight | 0.425 kg |
Additional Information 2 | with screw, with shaft seal |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (07871)
- 1x Febi Cap, wheel bearing (08929)
- 1x Febi Bolt, brake disc (05560)
- 2x Febi Screw (21143)
- 1x Febi Screw (08953)
Important compatibility info
Function | EGR Valve |
Operating Mode | Electric |
Valve head diameter | 31.3 mm |
Weight | 0.75 kg |
Number of Connectors / Ports | 5 |
Additional Information | with gasket/seal |
Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
for OE number | 004 153 18 28 |
Weight | 0.04 kg |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 195008 |
Weight | 3.02 kg |
Steering arm type | Control Arm |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting, control/trailing arm |
Weight | 0.786 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (22818)
- 2x Febi Mounting, control/trailing arm (22819)
Important compatibility info
Length | 210 mm |
Height | 51 mm |
Width | 198 mm |
Filter type | Filter Insert |
Weight | 0.326 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 59 mm |
Outer diameter | 91.6 mm |
Tightening Torque | 25 Nm |
Function | Cap, oil filter housing |
Manufacturer's restriction oil filter housing | Mahle |
Bolt Head/Nut Design | Male Hex |
Spanner Size | 32 |
Extra Description | febi Plus |
Weight | 0.095 kg |
Type | Cap, oil filter housing |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Weight | 11.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (17467)
- 1x Febi Coolant Pipe (48752)
- 1x Febi Seal Ring, water pump (49087)
- 1x Febi Seal Ring, water pump (49086)
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.4 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 74 |
Timing Chain Size | G67HP, G67HR |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 70 mm |
Width | 54 mm |
Material | PU (Polyurethane) |
Weight | 0.052 kg |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 10 |
Weight | 0.087 kg |
Control Type | Rotary Operation |
Type | Switch, headlight |
Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Operating Mode | Hydraulic |
Function | Actuator, seat adjustment |
Type | Actuator, seat adjustment |
Inner diameter 2 | 8 mm |
Inner diameter 1 | 4.6 mm |
Inner diameter 3 | 8.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, outer, Front Axle Right |
Outer diameter | 63.5 mm |
Thickness | 17 mm |
Inner diameter | 35.25 mm |
Bearing Type | Thrust Bearing |
Type | Bush, steering knuckle |
Function | Bush, steering knuckle |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.022 kg |
Function | Mounting, stabiliser bar |
Inner diameter | 23 mm |
Thickness | 37 mm |
Outer diameter | 36 mm |
Material | Plastic |
Width | 42 mm |
Length | 24 mm |
Placement on Vehicle | Rear Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 40 mm |
Outer diameter | 78 mm |
Inner diameter | 40 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Weight | 0.9 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Replaced by | 177520 |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Outer diameter | 113 mm |
Thickness | 247 mm |
Weight | 1.7 kg |
Type | Spring, driver cab suspension |
Function | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Cable Length | 607 mm |
Type | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 107991 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter, automatic transmission |
Type | Hydraulic Filter, automatic transmission |
Filter type | Screen Filter |
Weight | 0.290 kg |
Width | 187 mm |
Height | 52 mm |
Length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.8 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 296 mm |
Thickness | 47.1 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 64.1 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head Cover |
Weight | 1.728 kg |
Type | Cylinder Head Cover |
Colour | Black |
Paired article numbers | 182648 |
Material | Plastic |
Additional Information | with gasket/seal |
Placement on Vehicle | Left |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Weight | 13.6 kg |
Rolling piston material | Plastic |
External Thread Size | M22 x 1,5, M12 x 1,75, M16 x |
Type | Bellow, air suspension |
Outer diameter | 310 mm. 250 mm |
Thickness | 715 mm. 415 mm |
Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
for OE number | 23897050 |
Operating Mode | Electronic |
Function | Accelerator Pedal |
Type | Accelerator Pedal |
Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.832 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inspection Tag | EMC |
Width | 90 mm |
Height | 31 mm |
Weight | 0.077 kg |
Port / Connector type | PRS |
Voltage to | 24 V |
Voltage from | 12 V |
Function | Licence Plate Light |
Fulfils ECE norm | R10, R4 |
Protection Type (IP Code) | IP67 |
Light Design | LED |
Mounting Type | Bolted |
Cable Length | 500 mm |
Depth | 46 mm |
Type | Licence Plate Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.660 kg |
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 299 mm |
Thickness | 48.5 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 72 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 92 °C |
Type | Thermostat, coolant |
Additional Information 2 | with sensor |
Housing Type | with housing |
Function | Thermostat, coolant |
Weight | 0.263 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Material | PP (Polypropylene) |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Weight | 0.32 kg |
Additional Information 2 | without lid |
for OE number | 6C0 121 407 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Diameter 1 | 6 mm |
Length | 36 m |
Type | Tarpaulin rope |
Function | Tarpaulin rope |
Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023