Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 24 V |
| Weight | 3.42 kg |
| Control Range | 0,7+0,5 bar |
| Type | Air Dryer, compressed-air system |
| Rated Power | 100 W |
| Function | Air Dryer, compressed-air system |
| Cut-off Pressure | 8,5 bar |
| Additional Information 2 | with dryer, with integrated oil separator |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Inner diameter 1 | 14 mm |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Inner diameter 2 | 16 mm |
| Weight | 2.000 kg |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Pulleys | with belt pulley |
| Weight | 0.6 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Material | Aluminium |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 992 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 14.000 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 2.7 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 289 mm |
| Type | Shock Absorber, driver cab suspension |
| Min. Length | 209 mm |
| Function | Shock Absorber, driver cab suspension |
| Pipe Diameter | 36 mm |
| Mounting points diameter | 12 mm. 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 134 |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| Weight | 0.982 kg |
| for OE number | 13506-37040 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49728)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (174609)
- 1x Febi Guide, timing chain (109450)
£133.39
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Housing, fuel filter |
| Additional Information 2 | with pressure sensor |
| Housing material | Aluminium |
| Weight | 1.620 kg |
| Type | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Housing, fuel filter (179567)
- 1x Febi Sensor, oil pressure (100939)
£133.40
Important compatibility info
| Type | Hub, engine cooling fan wheel |
| Function | Hub, engine cooling fan wheel |
| Weight | 3.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.45
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Weight | 10.3 kg |
| Length | 570 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, control/trailing arm (35324)
£133.46
Important compatibility info
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Paired article numbers | 40129 |
| Additional Information 2 | with bearing |
| Outer diameter | 53 mm |
| Length | 235 mm |
| Placement on Vehicle | both sides |
| Type | Repair Kit, kingpin |
| Weight | 4.287 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (40730)
- 1x Febi Lock Ring, steering knuckle (40731)
- 1x Febi Lock Ring, steering knuckle (40736)
- 1x Febi Seal Ring, steering knuckle (40738)
- 1x Febi Seal Ring, steering knuckle (40737)
- 1x Febi O-Ring Repair Set (40739)
- 1x Febi Lock Ring, steering knuckle (40740)
- 4x Febi Screw (40741)
- 2x Febi Repair Kit, kingpin (40742)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (06635)
- 1x Febi Spacer, kingpin (46436)
- 1x Febi Spacer, kingpin (46437)
- 1x Febi Spacer, kingpin (46438)
- 1x Febi Spacer, kingpin (46439)
- 1x Febi Spacer, kingpin (46440)
- 1x Febi Spacer, kingpin (46441)
£133.52
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 668 mm |
| Steering arm type | Trailing Arm |
| Bore Diameter | 19 mm |
| Weight | 11.060 kg |
| Hole Pitch 1/ Hole Pitch 2 | 130/130 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.61
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.100 kg |
| External Teeth, Diff.Side | 29 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 809 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.71
Important compatibility info
| Weight | 2.828 kg |
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.72
Important compatibility info
| Extra Description | febi Plus |
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Weight | 3.593 kg |
| Material | Plastic |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.72
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 230 mm |
| Thickness | 167 mm. 527 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 8.2 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.73
Important compatibility info
| Weight | 0.040 kg |
| External Thread Size | M12 x 1,5 |
| Length | 49 mm |
| Spanner Size | 27 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.75
Important compatibility info
| Weight | 4.09 kg |
| Function | Camshaft |
| Type | Camshaft |
| for OE number | 075 109 101 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.85
Important compatibility info
| Material | Aluminium |
| Number of grooves | 9 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Weight | 3.26 kg |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.89
Important compatibility info
| Type | Fuel Pump |
| Mounting points diameter | 6.5 mm |
| Function | Fuel Pump |
| Internal Thread Size | M16 x 1,5, M12 x 1,25 |
| Number of mounting bores | 2 |
| Weight | 2.072 kg |
| Number of Connectors / Ports | 3 |
| Operating Mode | Mechanical |
| Material | Steel |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.91
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 2.784 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.10
Important compatibility info
| Weight | 5.19 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 472 mm |
| Min. Length | 332 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Replaces | 20056; 20070 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Weight | 4.95 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 591 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 700 mm |
| Pipe Diameter | 63 mm. 45 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Min. Length | 430 mm |
| Weight | 2.97 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 646 mm |
| Min. Length | 411 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber |
| Weight | 5.2 kg |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20436 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Weight | 4.12 kg |
| Replaces | 19205; 20047 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 695 mm |
| Min. Length | 425 mm |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Weight | 2.5 kg |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.14
Important compatibility info
| Function | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Weight | 0.817 kg |
| Inner diameter | 30 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 193 mm |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.16
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 113.85 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 38 |
| Weight | 7.058 kg |
| Number of mounting bores | 6 |
| Number of Teeth, ABS ring | 45 |
| Min. Length | 551 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.25
Important compatibility info
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 86 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 6.132 kg |
| Number of mounting bores | 6 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.28
Important compatibility info
| Material | Cast Steel |
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Weight | 8.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023