Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 230 mm |
| Thickness | 167 mm. 527 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 8.2 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.73
Important compatibility info
| Weight | 0.040 kg |
| External Thread Size | M12 x 1,5 |
| Length | 49 mm |
| Spanner Size | 27 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.75
Important compatibility info
| Weight | 4.09 kg |
| Function | Camshaft |
| Type | Camshaft |
| for OE number | 075 109 101 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.85
Important compatibility info
| Material | Aluminium |
| Number of grooves | 9 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Weight | 3.26 kg |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.89
Important compatibility info
| Type | Fuel Pump |
| Mounting points diameter | 6.5 mm |
| Function | Fuel Pump |
| Internal Thread Size | M16 x 1,5, M12 x 1,25 |
| Number of mounting bores | 2 |
| Weight | 2.072 kg |
| Number of Connectors / Ports | 3 |
| Operating Mode | Mechanical |
| Material | Steel |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.91
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 2.784 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.10
Important compatibility info
| Weight | 5.19 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 472 mm |
| Min. Length | 332 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Replaces | 20056; 20070 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Weight | 4.12 kg |
| Replaces | 19205; 20047 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 695 mm |
| Min. Length | 425 mm |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 700 mm |
| Pipe Diameter | 63 mm. 45 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Min. Length | 430 mm |
| Weight | 2.97 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Weight | 4.95 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 591 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 646 mm |
| Min. Length | 411 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber |
| Weight | 5.2 kg |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20436 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Weight | 2.5 kg |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.14
Important compatibility info
| Function | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Weight | 0.817 kg |
| Inner diameter | 30 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 193 mm |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.16
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 113.85 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 38 |
| Weight | 7.058 kg |
| Number of mounting bores | 6 |
| Number of Teeth, ABS ring | 45 |
| Min. Length | 551 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.25
Important compatibility info
| Material | Cast Steel |
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Weight | 8.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.28
Important compatibility info
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 86 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 6.132 kg |
| Number of mounting bores | 6 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.28
Important compatibility info
| Weight | 1.104 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 148 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108078)
- 1x Febi Tensioner, timing chain (108800)
- 1x Febi Guide, timing chain (108801)
- 1x Febi Guide, timing chain (107896)
- 1x Febi Gear/Sprocket, camshaft (108802)
- 1x Febi Sprocket, crankshaft (108803)
- 1x Febi Shaft Seal, crankshaft (107164)
£134.34
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Material | Aluminium |
| Weight | 3.08 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Weight | 1.387 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 30 mm |
| Outer diameter | 133 mm |
| Inner diameter | 85 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Function | Alternator |
| Voltage | 24 V |
| Weight | 6.98 kg |
| Type | Alternator |
| Pulleys | without belt pulley |
| Alternator Charge Current | 65 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023