Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Alternator |
| Voltage | 24 V |
| Type | Alternator |
| Pulleys | without belt pulley |
| Alternator Charge Current | 65 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.36
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 740 mm. 753 mm |
| Width | 70 mm |
| Spring Design | Leaf spring |
| Number of spring leaves | 1 |
| Type | Spring Pack |
| Function | Spring Pack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.36
Important compatibility info
| Pulleys | with belt pulley |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.36
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 29 mm |
| Bolt Hole Circle Diameter | 64 mm |
| Outer diameter | 136 mm |
| Thickness | 90 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 136 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.37
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 1 708 322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.38
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 30 |
| Min. Length | 620 mm |
| Wheel Sided Joint Diameter | 108 mm |
| Transmission-side joint diameter | 106 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.46
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 491 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 70 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.50
Important compatibility info
| Number of mounting bores | 3 |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.50
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 640 mm |
| Material | Steel |
| Steering arm type | Control Arm |
| Bore Diameter | 16.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.51
Important compatibility info
| Function | Mounting, electric motor (E-Axle) |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, electric motor (E-Axle) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.54
Important compatibility info
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.58
Important compatibility info
| Replaces | 19205; 20047 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 695 mm |
| Min. Length | 425 mm |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.64
Important compatibility info
| Type | Alternator |
| Alternator Charge Current | 80 A |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 55 mm |
| Function | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.65
Important compatibility info
| Belts | with rounded tooth profile |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Width | 32 mm |
| Number of Teeth | 211 |
| Surface | Coated |
| for OE number | 13568-YZZ10 S2 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26845)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26806)
- 1x Febi Tensioner Pulley, timing belt (26805)
- 1x Febi Tensioner, timing belt (174740)
£135.71
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Paired article numbers | 41079 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.74
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.81
Important compatibility info
| Function | Camshaft Kit |
| Type | Camshaft Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft (10009)
- 8x Febi Tappet (08064)
£135.86
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Housing material | Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.86
Important compatibility info
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 481 mm |
| Core Width | 630 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.86
Important compatibility info
| Thickness | 640 mm. 285 mm |
| Function | Bellow, air suspension |
| Outer diameter | 226 mm. 250 mm |
| External Thread Size | M14 x 2, M16 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.88
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023