Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 48 mm |
| Current Strength | 140 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.12
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10 x 1,5 |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 1041 mm |
| ABS Ring Diameter | 82 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Transmission-side joint diameter | 106 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.12
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (47758)
- 1x Febi Gasket, oil pump (174425)
- 1x Febi Gasket, oil pump (173400)
- 3x Febi Screw (177756)
- 4x Febi Screw (180865)
£160.18
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Paired article numbers | 176915 |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.33
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
| Exhaust Emission Norm | Euro 6 |
| Voltage | 24 V |
| Type | NOx Sensor, urea injection |
| Cable Length | 890 mm |
| Placement on Vehicle | after catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.36
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.45
Important compatibility info
| Operating Mode | Electronic |
| for OE number | 2 395 420 |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.58
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 31.7 mm |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.61
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Additional Information 2 | with bolts/screws, with spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.61
Important compatibility info
| Voltage | 24 V |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 133 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 135 ml |
| Number of grooves | 1 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.77
Important compatibility info
| Length | 250 mm |
| Width | 250 mm |
| Thickness | 100 mm |
| Operating Mode | Electric |
| Function | Mechatronics, automatic transmission |
| Extra Description | febi Plus |
| Type | Mechatronics, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.81
Important compatibility info
| Length | 96 mm |
| Outer diameter | 70 mm |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.81
Important compatibility info
| Additional Information 2 | with screw, with spacer disc |
| Outer diameter | 158 mm |
| Inner diameter | 38 mm |
| Width | 40 mm |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (104451)
- 1x Febi Washer, crankshaft pulley (174269)
- 1x Febi Screw (173360)
£160.88
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.01
Important compatibility info
| Width | 67 mm |
| Material | Metal |
| Outer diameter | 80 mm. 23.5 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28.5 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.07
Important compatibility info
| Width | 110 mm |
| Material | Aluminium |
| Outer diameter | 63 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.07
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 108 |
| Timing Chain Size | G68VH |
| Function | Timing Chain Kit |
| Placement on Vehicle | Upper |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (39968)
- 1x Febi Tensioner, timing chain (104076)
- 1x Febi Guide, timing chain (101879)
- 1x Febi Guide, timing chain (101878)
£161.10
Important compatibility info
| Outer diameter | 83 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Mounting points diameter | 9 mm |
| Function | Oil Cooler, engine oil |
| Length | 252 mm |
| Height | 135 mm |
| Width | 148 mm |
| Internal Thread Size | M10 x 1,5 |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023