Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Weight | 8.365 kg |
| Cone Size | 26 mm. 30 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Extra Description | ProKit |
| Thread Size | M20 x 1,5, M24 x 1,5 |
| Additional Information | with nuts |
| Adjustable | Adjustable on one side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 0.165 kg |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 11 61 7 503 520 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 97 mm |
| Alternator Charge Current | 80 A |
| Pulleys | without belt pulley |
| Voltage | 24 V |
| Weight | 7.96 kg |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.29
Important compatibility info
| Weight | 0.095 kg |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Outer diameter | 89.4 mm |
| Bolt Head/Nut Design | Male Hex |
| Spanner Size | 32 |
| Height | 58.6 mm |
| Manufacturer's restriction oil filter housing | Purflux |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| Length | 67 mm |
| Width | 70 mm |
| Thickness | 67 mm |
| Weight | 0.75 kg |
| Inner diameter | 16 mm |
| Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
| Outer diameter | 70.5 mm |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.15
Important compatibility info
| Material | Plastic |
| Weight | 0.024 kg |
| Opening Pressure | 1.08 bar |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.6 kg |
| Placement on Vehicle | Rear Axle Right |
| Length | 184 mm |
| Outer diameter | 11 mm |
| Thickness | 83 mm |
| Spanner Size | 22 |
| Paired article numbers | 102228 |
| Rod/Strut | Coupling Rod |
| Thread Length | 38 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M14 x 2 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.36
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Weight | 0.202 kg |
| Type | Wheel Brake Cylinder |
| Piston Diameter | 19.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.80
Important compatibility info
| Weight | 0.66 kg |
| Height | 12 mm. 16 mm |
| Outer diameter | 125 mm |
| Inner diameter | 105 mm |
| Function | Shaft Seal, manual transmission |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 71 mm |
| Width | 68 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Weight | 0.052 kg |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.71
Important compatibility info
| Weight | 6.6 kg |
| Cone Size | 32 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Length | 860 mm. 750 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.203 kg |
| Piston Diameter | 22 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.02
Important compatibility info
| Weight | 6.0 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 270 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 22 mm |
| Inner diameter | 125 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.24
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 182647 |
| Colour | Black |
| Weight | 1.868 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.82 kg |
| for OE number | 3140086G00 |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Port / Connector type | PRS |
| Length | 181 mm |
| Placement on Vehicle | Left |
| Type | End Outline Marker Light |
| Weight | 0.169 kg |
| Fulfils ECE norm | R7, R91 |
| Cable Length | 500 mm |
| Function | End Outline Marker Light |
| Voltage to | 24 V |
| Mounting bores distance | 78 mm |
| Light Design | LED |
| Protection Type (IP Code) | IP67 |
| Voltage from | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.41
Important compatibility info
| Weight | 8.245 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 53.1 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.20
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Inner diameter 2 | 101 mm |
| Inner diameter 1 | 33 mm |
| Type | Bellow Kit, drive shaft |
| Weight | 0.211 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Paired article numbers | 174420 |
| Length | 117 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174373)
- 1x Febi High Temperature Lubricant (03630)
£20.63
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 23 mm |
| Outer diameter | 320 mm |
| Thickness | 48.8 mm |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Weight | 9.66 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.22
Important compatibility info
| Weight | 2.0 kg |
| Number of Coils | 4.8 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Length | 362 mm |
| Outer diameter | 163 mm |
| Wire Diameter | 12.8 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Stabiliser Diameter | 31 mm |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Additional Information | with rubber mounts |
| Weight | 4.516 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174334)
- 2x Febi Mounting, stabiliser bar (23046)
- 2x Febi Link/Coupling Rod, stabiliser bar (27867)
- 4x Febi Nut (22263)
- 2x Febi Screw (31033)
- 2x Febi Screw (31032)
£141.29
Important compatibility info
| Weight | 0.02 kg |
| Placement on Vehicle | Front Axle |
| Inner diameter | 20.8 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.90
Important compatibility info
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Length | 4145 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.634 kg |
| Replaces | 19034 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission |
| Width | 175 mm |
| Length | 188.8 mm |
| Height | 20 mm |
| Weight | 0.441 kg |
| Additional Information 2 | with oil sump gasket |
| Filter type | Screen Filter |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (04872)
- 1x Febi Gasket, automatic transmission oil sump (08717)
£14.49
Important compatibility info
| Weight | 0.480 kg |
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.83
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Length | 195 mm |
| Width | 61 mm |
| Material | Rubber/Metal |
| Thickness | 61 mm |
| Weight | 0.44 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.22
Important compatibility info
| Weight | 0.620 kg |
| Width | 24 mm |
| Number of Teeth | 190 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt Kit |
| Additional Information 2 | with bolts/screws |
| Type | Timing Belt Kit |
| for OE number | 71736726 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10984)
- 1x Febi Tensioner Pulley, timing belt (10298)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (23654)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178788)
£63.18
Important compatibility info
| Weight | 0.732 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 165 mm. 139 mm |
| Thickness | 101 mm |
| Spanner Size | 16 |
| Paired article numbers | 44281 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (44280)
- 1x Febi Nut (38356)
£21.11
Important compatibility info
| Length | 38 mm |
| Width | 46 mm |
| Outer diameter | 46 mm |
| Thickness | 54 mm |
| Inner diameter | 23 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber, Rubber with fabric lining |
| Weight | 0.064 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.65
Important compatibility info
| Weight | 5.77 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 751 mm |
| Min. Length | 460 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.91
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023