Important compatibility info
| Spanner Size | 22 |
| Cable Length | 354 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Paired article numbers | 182075 |
| Placement on Vehicle | Front Axle Right, Lower |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 19 mm |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 155 mm. 489 mm |
| External Thread Size | 1/4" - 18 NPT, 3/4" - 16 UNF, 1/2 " 13 UNC |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 286 mm. 258 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with right-hand thread |
| Placement on Vehicle | Front Axle |
| Length | 1729 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Valve, service brake |
| Function | Brake Valve, service brake |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183418 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Material | Plastic |
| Colour | Black |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 591 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 168 |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67ZN |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (18914)
- 1x Febi Timing Chain (25207)
- 2x Febi Guide, timing chain (21231)
- 1x Febi Guide, timing chain (21232)
- 1x Febi Guide, timing chain (21233)
Important compatibility info
| Number of Teeth | 36 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Adjustable | adjustable |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring, with bore for oil-level sensor |
| Wet Sump Material | Cast Aluminium |
| External Thread Size | M12 x 1,5 |
| Length | 456 mm |
| Additional Information | with oil drain plug |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| Additionally required parts | Sealant |
| Additionally recommended article | Mounting Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 0801.FV |
| Number of Teeth | 19 |
| Placement on Vehicle | Intake Side |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 785 mm |
| Width | 280 mm |
| Height | 285 mm |
| Colour | Black |
| Function | Oil sump |
| Wet Sump Material | Sheet Steel |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 12.4 mm |
| Min. Length | 287 mm |
| Mounting points diameter | 12 mm |
| Max. Length | 363 mm |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 53 mm |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 1 | 70 mm |
| Placement on Vehicle | Outer |
| Width | 37 mm |
| Outer diameter | 120 mm |
| Inner diameter | 70 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Width 1 | 43 mm |
| Outer diameter 1 | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (09876)
- 1x Febi Wheel Bearing Kit (174176)
Important compatibility info
| Additional Information 2 | without screw |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 38 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















