Important compatibility info
Weight | 0.481 kg |
Function | Filter, crankcase ventilation |
Type | Filter, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 188 mm |
Height | 116 mm |
Type | Mounting, engine |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.437 kg |
Width | 126 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.069 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1040 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178202 |
Weight | 1.67 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.176 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Length | 1950 mm |
Placement on Vehicle | Centre |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 21486 |
Weight | 0.766 kg |
Placement on Vehicle | Front Axle Left, Lower, inner |
Function | Ball Joint |
Mounting points diameter | 11 mm. 12 mm. 13 mm |
Cone Size | 16.5 mm |
Type | Ball Joint |
Steering arm type | for control arm |
External Thread Size | M14 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 37 mm |
Outer diameter | 75 mm |
Inner diameter | 42 mm |
Bearing Type | Angular Ball Bearing |
Weight | 0.73 kg |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04526)
- 1x Febi Clamping Bolt, ball joint (03973)
- 1x Febi Nut, kingpin (19159)
- 1x Febi Nut (05360)
- 1x Febi Nut (11435)
- 2x Febi Circlip (04015)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 38 |
Weight | 7.271 kg |
Min. Length | 651 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 123 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Width | 22 mm |
Material | Metal |
Outer diameter | 50 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Number of Ribs | 4 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Weight | 0.064 kg |
Length | 1120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023