Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 801 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Mounting points diameter | 20 mm. 16 mm |
| Min. Length | 485 mm |
| Pipe Diameter | 76 mm. 65 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£167.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 564 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£167.79
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information 2 | with seal ring, with bolts/screws |
| Pulleys | with belt pulley |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£167.97
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Function | Tilt Pump, driver cab |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£167.97
Important compatibility info
| Alternator Charge Current | 90 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Belt Pulley Diameter | 62 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.00
Important compatibility info
| Placement on Vehicle | Rear |
| Function | Door Lock, driver cab |
| Type | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Type | Camshaft Adjuster |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Number of Teeth | 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Function | Clutch Disc |
| for OE number | 1708 084 |
| Outer diameter | 362 mm |
| Type | Clutch Disc |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Function | Hydraulic Pump, steering |
| Inner diameter | 11 mm. 21 mm |
| Operating pressure to | 13 bar |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 3 |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| for OE number | 006 466 26 01 |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| External Teeth, Wheel Side | 31 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 669 mm |
| Wheel Sided Joint Diameter | 85.4 mm |
| Transmission-side joint diameter | 84.6 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183463 |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Additional Information | with spring, with gasket/seal |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 988 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Additional Information 2 | with filter |
| Filter type | with water separator, with connection for water sensor |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cover, fuel filter (192757)
- 1x Febi Water Separator, fuel system (185556)
- 1x Febi Fuel filter (29454)
£168.04
Important compatibility info
| Number of Ribs | 6 |
| Voltage | 12 V |
| Function | Alternator |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Current Strength | 90 A |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.05
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.08
Important compatibility info
| Number of Teeth | 38 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (171987)
- 1x Febi Bolt, camshaft gear (101125)
- 1x Febi Quill, cylinder head (101129)
£168.11
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.18
Important compatibility info
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 167 mm |
| Inner diameter | 34 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.34
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.35
Important compatibility info
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M20 x 1,5 |
| Function | NOx Sensor, urea injection |
| Type | NOx Sensor, urea injection |
| Cable Length | 590 mm |
| Voltage | 24 V |
| for OE number | 010 153 14 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.47
Important compatibility info
| Stroke | 64 mm |
| Distance of fastening bolts | 120 mm |
| Brake Type | Disc Brake |
| Type | Spring-loaded Cylinder |
| Function | Spring-loaded Cylinder |
| Piston Rod Length | 15 mm |
| Internal Thread Size | M22 x 1,5 |
| Parameter | Typ 20 / 24 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023