Important compatibility info
for OE number | 002 091 97 01 |
Additional Information | with fastening/mounting material |
Operating Mode | Electric |
Function | Fuel Pump |
Type | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | 4PK + 6PK |
Function | Belt Pulley, crankshaft |
Width | 58 mm |
Outer diameter | 194 mm |
Inner diameter | 32 mm |
Number of Ribs | 8 |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information 2 | with screw, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32219)
- 1x Febi Centering Bolt, crankshaft pulley (33612)
- 1x Febi Washer, crankshaft pulley (33587)
Important compatibility info
Belt Pulley Diameter | 77 mm |
Alternator Charge Current | 80 A |
Voltage | 24 V |
Pulleys | with belt pulley |
Number of Ribs | 9 |
Function | Alternator |
Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Width | 64 mm |
Placement on Vehicle | Rear Axle |
Inner diameter | 32 mm |
Outer diameter | 85 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Additional Information | with gasket/seal |
Replaces | 172491 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Function | Tilt Pump, driver cab |
Operating Mode | Manual |
Number of Connectors / Ports | 2 |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Paired article numbers | 177794 |
Number of Connectors / Ports | 6 |
Type | Electric Motor, window regulator |
Function | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 177793 |
Number of Connectors / Ports | 6 |
Function | Electric Motor, window regulator |
Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Paired article numbers | 177798 |
Operating Mode | Electric |
Additional Information | with electric motor |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | with electric motor |
Operating Mode | Electric |
Paired article numbers | 177797 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Mounting points diameter | 14 mm |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Max. Length | 429 mm |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Pipe Diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Paired article numbers | 186336 |
Colour | Black |
Extra Description | febi Plus |
Function | Cylinder Head Cover |
Material | Plastic |
Additional Information | with gasket/seal |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Width | 102 mm |
Outer diameter | 168 mm |
Additional Information 2 | with ABS sensor ring |
Inner diameter | 60 mm |
Bolt Hole Circle Diameter | 144 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 7 |
Function | Throttle body |
Type | Throttle body |
for OE number | 030 133 064 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 7 |
Ignition Coil | 3 Spark |
Function | Ignition Coil |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Valve Plate, air compressor |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with valves |
Type | Bearing Bracket, camshaft |
Extra Description | febi Plus |
Function | Bearing Bracket, camshaft |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing Bracket, camshaft (176249)
- 2x Febi Control Valve, camshaft adjustment (180080)
- 2x Febi Central Magnet, camshaft adjustment (40198)
- 1x Febi Gasket, timing case cover (171915)
Important compatibility info
Paired article numbers | 176931 |
Placement on Vehicle | Exhaust Side |
Type | Camshaft |
Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 130 A |
Belt Pulley Diameter | 65 mm |
Current Strength | 130 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 44 mm |
Inner diameter | 94 mm |
Number of Ribs | 6. 8 |
Outer diameter 1 | 168 mm |
Parameter | 4PK + 6PK |
Outer diameter 2 | 144 mm |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 08747 |
Function | Camshaft |
Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 35 mm |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Outer diameter | 81 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1025 mm |
Outer diameter | 60 mm |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
Cone Size | 28.8 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Type | Alternator |
for OE number | 010 154 92 02 |
Voltage | 24 V |
Pulleys | with belt pulley |
Alternator Charge Current | 100 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Alternator |
Alternator Charge Current | 80 A |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Belt Pulley Diameter | 55 mm |
Function | Alternator |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain |
Type | Timing Chain |
Number of Chain Links | 180 |
Chain Type | Silent Chain, Closed chain |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 50 01 855 204 |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Outer length 1 | 3285 mm |
Inner length 1 | 2855 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with piston |
Outer diameter | 238 mm. 227 mm |
Thickness | 460 mm. 260 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Rolling piston material | Plastic |
External Thread Size | M16 x 1,5, M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Opening Temperature | 84 °C |
Outer diameter | 61.1 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Trailing Arm |
Bore Diameter | 21 mm |
Pipe Diameter | 50 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle |
Length | 610 mm |
Material | Steel |
Hole Spacing | 152 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 89.2 mm |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Width | 65 mm |
Inner diameter | 33 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 80 A |
Belt Pulley Diameter | 54 mm |
Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with belt pulley |
Alternator Charge Current | 100 A |
Belt Pulley Diameter | 60 mm |
Current Strength | 100 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pulleys | with freewheel belt pulley |
Belt Pulley Diameter | 56 mm |
Type | Alternator |
Function | Alternator |
Voltage | 12 V |
Alternator Charge Current | 110 A |
Current Strength | 110 A |
Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Placement on Vehicle | Rear Axle |
Function | Stabiliser Bar, suspension |
Extra Description | ProKit |
Type | Stabiliser Bar, suspension |
Additional Information 2 | with coupling rod |
Stabiliser Diameter | 22.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171029)
- 2x Febi Link/Coupling Rod, stabiliser bar (36989)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
Important compatibility info
Function | Shock Absorber |
Pipe Diameter | 74 mm. 66 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 17 mm |
Min. Length | 294 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 429 mm |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Mechanical |
Function | Pump, fuel pre-supply |
Length | 129 mm |
Internal Thread Size | M16 x 1,5 |
Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Stabiliser Diameter | 22.9 mm |
Placement on Vehicle | Front Axle |
Additional Information 2 | with coupling rod |
Type | Stabiliser Bar, suspension |
Function | Stabiliser Bar, suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174338)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
Important compatibility info
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Pipe Diameter | 70 mm. 51 mm |
Mounting points diameter | 20 mm. 16 mm |
Placement on Vehicle | Front Axle |
Piston conrod diameter | 18 mm |
Function | Shock Absorber |
Min. Length | 407 mm |
Max. Length | 657 mm |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 48101 |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Lower, Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 632 mm |
Min. Length | 370 mm |
Pipe Diameter | 75 mm. 64 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint, with rubber mount |
Paired article numbers | 41078 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Additional Information 2 | with brake fluid reservoir |
Type | Brake Master Cylinder |
Function | Brake Master Cylinder |
Driver Position | for right-hand drive vehicles |
Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pulleys | with belt pulley |
Number of Ribs | 2 |
Belt Pulley Diameter | 74 mm |
Alternator Charge Current | 120 A |
Type | Alternator |
Voltage | 12 V |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Type | Alternator |
Alternator Charge Current | 100 A |
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with belt pulley |
Belt Pulley Diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with belt pulley |
Alternator Charge Current | 100 A |
Belt Pulley Diameter | 60 mm |
Current Strength | 100 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Guide Rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
Length | 644 mm |
Outer diameter | 50 mm |
Inner diameter | 40 mm. 65 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 50 mm |
Function | Control/Trailing Arm, wheel suspension |
Mounting points diameter | 19 mm |
Hole Spacing | 130 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Grey Cast Iron |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Number of Wings | 12 |
Seal Material | Rubber/Metal, Rubber |
Housing material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 50 mm |
Number of Ribs | 6 |
Voltage | 12 V |
Pulleys | with belt pulley |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M30 x 1,5 |
Placement on Vehicle | Front Axle |
Steering arm type | Trailing Arm, Control Arm |
Cone Size | 42 mm |
Pipe Diameter | 50 mm |
Mounting points diameter | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023