Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 564 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 58 mm |
Mounting points diameter | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Additional Information 2 | with seal ring |
Number of grooves | 12 |
Type | Water Pump, engine cooling |
Seal Material | Rubber |
Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Metal |
Housing material | Cast Aluminium |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Vehicle Equipment | for vehicles with start-stop function |
Number of Wings | 9 |
Additional Information | with gasket/seal |
Additional Information 2 | switchable water pump |
Operating Mode | Vacuum-controlled |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Additional Information | with spring |
Additional Information 2 | with screw |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 84.7 mm |
Wheel Sided Joint Diameter | 85.6 mm |
Min. Length | 782 mm |
External Teeth, Diff.Side | 27 |
Thread Size | M16x1,5 |
Paired article numbers | 183675 |
External Teeth, Wheel Side | 31 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Type | Alternator |
Belt Pulley Diameter | 60 mm |
Alternator Charge Current | 70 A |
Pulleys | with belt pulley |
Voltage | 12 V |
Number of Ribs | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 150 A |
Belt Pulley Diameter | 59 mm |
Current Strength | 150 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Operating Mode | Electric-pneumatic |
Valve type | Solenoid Valve |
Type | EGR valve, exhaust control |
Function | EGR valve, exhaust control |
Internal Thread Size | M10 x 1, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 25 |
External Teeth, Diff.Side | 34 |
Min. Length | 976 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 74.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Pulley, crankshaft |
Outer diameter | 158 mm |
Inner diameter | 38 mm |
Width | 157 mm |
Type | Belt Pulley, crankshaft |
Parameter | 6 PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 32 mm |
Width | 120 mm |
Outer diameter | 90 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 774 mm |
Placement on Vehicle | Rear Axle |
Piston conrod diameter | 22 mm |
Pipe Diameter | 70 mm. 80 mm |
Mounting points diameter | 16 mm. 20 mm |
Min. Length | 470 mm |
Shock Absorber Type | Oil Pressure |
Type | Shock Absorber |
Replaces | 20150 |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Placement on Vehicle | Front Axle |
Max. Length | 657 mm |
Min. Length | 403 mm |
Pipe Diameter | 75 mm. 63 mm |
Mounting points diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Pump |
Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 6 mm |
Function | Washer Fluid Reservoir, window cleaning |
Fill quantity | 9.8 l |
Length | 402 mm |
Type | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1069 mm |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Adjustable | not adjustable |
Pipe Diameter | 620 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 735 mm |
Min. Length | 455 mm |
Pipe Diameter | 75 mm. 64 mm |
Mounting points diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 74 °C |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Outer diameter | 66.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 46 |
Extra Description | febi Plus |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
for OE number | 25203205 |
Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Ignition Coil | 4 Spark |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 362 mm |
Number of Teeth | 10 |
Type | Clutch Disc |
Function | Clutch Disc |
for OE number | 81.30301.0529 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 353 mm |
Min. Length | 277 mm |
Mounting points diameter | 12 mm |
Piston conrod diameter | 12 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, with chain lock |
Number of Chain Links | 104 |
Timing Chain Size | G68HSF-6 |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 24321-2B100 S1 |
Number of Chain Links | 158 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Chain Type | Silent Chain, Closed chain |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108378)
- 1x Febi Tensioner, timing chain (170729)
- 1x Febi Guide, timing chain (174739)
- 1x Febi Guide, timing chain (174742)
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 120 A |
Belt Pulley Diameter | 50 mm |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 12 |
Rated Power | 2 kW |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cylinder Head Gasket Set, air compressor |
Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 723 mm |
Min. Length | 443 mm |
Mounting points diameter | 20 mm |
Pipe Diameter | 73 mm. 63.5 mm |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
for OE number | 006 326 60 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 585 mm |
Hole Spacing | 152 mm |
Placement on Vehicle | Rear Axle |
Steering arm type | Trailing Arm |
Pipe Diameter | 50 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Driver side |
Voltage | 24 V |
Colour | black |
Number of Connectors / Ports | 4 |
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Combi Switch Function | Mirror Adjustment, Door Locking, Folding/tilting exterior mirrors, Heated wing mirror on/off, Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 635 mm |
Min. Length | 386 mm |
Pipe Diameter | 70 mm. 80 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
External Thread Size | M16 x 1,5 |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Replaces | 20348 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | with electric motor |
Operating Mode | Electric |
Paired article numbers | 183419 |
Number of Connectors / Ports | 2 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Placement on Vehicle | Right Front |
Additional Information | with electric motor |
Operating Mode | Electric |
Paired article numbers | 183418 |
Number of Connectors / Ports | 2 |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 67.6 mm |
Additional Information 2 | with seal ring |
Opening Temperature | 77 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 630 mm. 161 mm |
Type | Bellow, air suspension |
Placement on Vehicle | Rear Axle |
Outer diameter | 227 mm. 260 mm |
Additional Information | with piston rod, with piston |
Function | Bellow, air suspension |
External Thread Size | 1/2" - 13 UNC, 3/4" - 16 UNF, 1/4" - 18 NPTF |
Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 105907 |
Function | Window Regulator |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Operating Mode | Electric |
Paired article numbers | 105906 |
Function | Window Regulator |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 143 mm |
Width | 143 mm |
Parameter | 6PK |
Type | Belt Pulley, crankshaft |
Inner diameter | 30 mm |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | Standard Medium Kit |
Function | Timing Chain Kit |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 106 |
Timing Chain Size | G67HR |
for sprocket height (incl. body) | 33 mm |
Type | Timing Chain Kit |
Thickness | 33 mm |
Additional Information

General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30668)
- 1x Febi Tensioner, timing chain (101097)
- 1x Febi Guide, timing chain (101098)
- 1x Febi Guide, timing chain (101099)
- 1x Febi Gear/Sprocket, camshaft (25469)
- 1x Febi Sprocket, crankshaft (101101)
- 3x Febi Bolt, camshaft gear (180594)
- 3x Febi Bolt, camshaft gear (180595)
Important compatibility info
Function | Oil Pump |
Timing Chain Size | G68V |
Type | Oil Pump |
Additional Information | with oil pump chain, with slide rail |
Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (19062)
- 1x Febi Chain, oil pump drive (09442)
- 1x Febi Rail, oil pump drive chain (25302)
Important compatibility info
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Coolant Control Valve |
Type | Coolant Control Valve |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 50 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 152 mm |
Steering arm type | Trailing Arm |
Length | 605 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Additional Information 2 | with nut |
External Teeth, Diff.Side | 27 |
External Teeth, Wheel Side | 28 |
Thread Size | M22 x 1,5 |
Additional Information | with Split Pin, with axle nut |
Placement on Vehicle | Front Axle Left |
Min. Length | 634 mm |
Type | Drive Shaft |
Paired article numbers | 193518 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Alternator Charge Current | 110 A |
Pulleys | with freewheel belt pulley |
Voltage | 12 V |
Number of Ribs | 6 |
Function | Alternator |
Type | Alternator |
Current Strength | 110 A |
Belt Pulley Diameter | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Stabiliser Bar, suspension |
Placement on Vehicle | Front Axle |
Additional Information 2 | with coupling rod |
Stabiliser Diameter | 27 mm |
Additional Information | with rubber mounts |
Function | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174336)
- 2x Febi Mounting, stabiliser bar (10022)
- 2x Febi Link/Coupling Rod, stabiliser bar (39895)
- 2x Febi Screw (37265)
- 2x Febi Screw (38298)
- 2x Febi Nut (22263)
Important compatibility info
Function | Camshaft |
Type | Camshaft |
Paired article numbers | 180725 |
Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 6 |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Housing Type | with housing |
Type | Mass Air Flow Sensor |
for OE number | 77 00 109 812 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023