Important compatibility info
| Length | 479 mm |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Height | 169 mm |
| Width | 296 mm |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 66 mm |
| Outer diameter | 95 mm |
| Inner diameter | 49 mm |
| Filter type | Filter Insert |
| Seal Diameter | 100 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 274 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
| for OE number | 4G0 615 121 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 610 mm |
| Type | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 173172 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Length | 360 mm |
| Outer diameter | 117 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Number of Coils | 6.5 |
| Wire Diameter | 10.8 mm |
| Placement on Vehicle | Rear Axle |
| Length | 320 mm |
| Outer diameter | 108 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 80 mm |
| Inner diameter 1 | 24 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 99 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175391)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Width | 66.9 mm |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.4 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Length | 131.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Guide Sleeve, clutch |
| Type | Guide Sleeve, clutch |
| for OE number | 2105.51 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 140 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









