Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (101080)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (170711)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Oil Filter (49868)
- 1x Febi Fuel filter (31397)
£152.69
Important compatibility info
| Additional Information 2 | without screw |
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Extra Description | febi Plus |
| Number of Teeth | 54 |
| Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.69
Important compatibility info
| Length | 600 mm |
| Multi-piece | one-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.69
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.94
Important compatibility info
| Operating Mode | Mechanical |
| Function | Pump, fuel pre-supply |
| Length | 129 mm |
| Internal Thread Size | M16 x 1,5 |
| Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.98
Important compatibility info
| for OE number | 059 145 950 R |
| Type | Throttle body |
| Function | Throttle body |
| Voltage | 12 V |
| Operating Mode | Electric |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.02
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 632 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 75 mm. 64 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.05
Important compatibility info
| Function | Vacuum Pump, braking system |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.15
Important compatibility info
| Paired article numbers | 48102 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.15
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Replaces | 102038; 30495 |
| Number of Chain Links | 118. 66 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HC, G53HR |
| Extra Description | Full Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25371)
- 1x Febi Tensioner, timing chain (25412)
- 1x Febi Guide, timing chain (27060)
- 1x Febi Guide, timing chain (25468)
- 1x Febi Gear/Sprocket, camshaft (25456)
- 1x Febi Sprocket, crankshaft (27072)
- 1x Febi Sprocket, crankshaft (27046)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Chain, oil pump drive (25398)
- 1x Febi Chain Tensioner, oil pump drive (33838)
- 1x Febi Pulley Bolt (32025)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 3x Febi Screw (102039)
£153.15
Important compatibility info
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 52 mm |
| Type | Alternator |
| Voltage | 12 V |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.15
Important compatibility info
| Replaces | 36419 |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 190 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HR |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide Rails Kit, timing chain (30279)
- 1x Febi Timing Chain (33902)
- 1x Febi Tensioner, timing chain (26750)
£153.15
Important compatibility info
| Alternator Charge Current | 140 A |
| Pulleys | with freewheel belt pulley |
| Function | Alternator |
| Type | Alternator |
| Number of Ribs | 5 |
| Voltage | 12 V |
| Belt Pulley Diameter | 56 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.18
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 105 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.18
Important compatibility info
| Thickness | 87 mm |
| Inner diameter | 65 mm |
| Function | Suspension, propshaft |
| Hole Spacing | 230 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 925 mm |
| Wheel Sided Joint Diameter | 87 mm |
| Transmission-side joint diameter | 81.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.33
Important compatibility info
| Type | Camshaft |
| Placement on Vehicle | Intake Side |
| Function | Camshaft |
| for OE number | 2 431 073 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.38
Important compatibility info
| Width | 40 mm |
| Outer diameter | 158 mm |
| Inner diameter | 38 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.38
Important compatibility info
| Additional Information | without adjusting element, with gasket/seal |
| Material | Plastic |
| Colour | black |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.54
Important compatibility info
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm, Control Arm |
| Cone Size | 42 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.66
Important compatibility info
| Height | 631 mm |
| Outer diameter | 355 mm |
| Inner diameter | 139 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.68
Important compatibility info
| Length | 150 mm |
| Width | 140 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Hub, engine cooling fan wheel |
| Function | Hub, engine cooling fan wheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.68
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Housing, oil cooler |
| Width | 265 mm |
| Length | 465 mm |
| Type | Housing, oil cooler |
| Thickness | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.68
Important compatibility info
| Extra Description | febi Plus |
| Length | 270 mm |
| Height | 197 mm |
| Width | 145 mm |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
| Material | Plastic |
| Opening Temperature | 82 °C |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Additional Information 2 | with thermostat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.68
Important compatibility info
| Seal Material | Rubber/Metal |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of grooves | 5 |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Pulleys | with belt pulley |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.68
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Additional Information | with insulating hood |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 226 mm |
| Thickness | 250 mm. 595 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.84
Important compatibility info
| Thickness | 33 mm |
| Inner diameter | 30 mm |
| Parameter | 5PK |
| Number of Ribs | 4 |
| Outer diameter | 153 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.85
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.09
Important compatibility info
| Outer diameter | 395 mm |
| Number of Teeth | 10 |
| for OE number | 1703 739 |
| Type | Clutch Disc |
| Function | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.17
Important compatibility info
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Length | 644 mm |
| Outer diameter | 50 mm |
| Inner diameter | 40 mm. 65 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.29
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023