Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | EGR Valve |
| Weight | 0.605 kg |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.85
Important compatibility info
| Additional Information 2 | with screw, with spacer disc |
| Outer diameter | 158 mm |
| Inner diameter | 38 mm |
| Width | 40 mm |
| Weight | 2.69 kg |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (104451)
- 1x Febi Washer, crankshaft pulley (174269)
- 1x Febi Screw (173360)
£160.88
Important compatibility info
| Weight | 1.561 kg |
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.01
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 80 |
| Weight | 0.70 kg |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | G53H-6, G53HRF-1 |
| Type | Chain Kit, oil pump drive |
| Wet Boiling Point | 189 °C |
| Replaces | 43667 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25388)
- 1x Febi Gear, balance shaft (25451)
- 1x Febi Gear, balance shaft (25453)
- 1x Febi Sprocket/Gear, oil pump (25454)
- 1x Febi Chain Tensioner, oil pump drive (32265)
£161.06
Important compatibility info
| Width | 110 mm |
| Material | Aluminium |
| Outer diameter | 63 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
| Weight | 1.016 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.07
Important compatibility info
| Width | 67 mm |
| Material | Metal |
| Outer diameter | 80 mm. 23.5 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28.5 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.43 kg |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.07
Important compatibility info
| Weight | 4.700 kg |
| for OE number | 51.08101.6331 |
| Mounting points diameter | 12 mm |
| Type | Manifold, exhaust system |
| Function | Manifold, exhaust system |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Weight | 3.232 kg |
| Additional Information 2 | with spacer plate |
| Length | 247 mm |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Function | Wheel Hub |
| Type | Wheel Hub |
| Weight | 18.0 kg |
| Bolt Hole Circle Diameter | 335 mm |
| Outer diameter | 380 mm |
| Additional Information 2 | without wheel bearing |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Piston conrod diameter | 12.4 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 320 mm |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Placement on Vehicle | Rear |
| Weight | 2.6 kg |
| Min. Length | 238 mm |
| Mounting points diameter | 12 mm |
| Operating Mode | Pneumatic |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 78 mm |
| Weight | 6.3 kg |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Weight | 16.4 kg |
| Placement on Vehicle | Rear Axle |
| Length | 625 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Pipe Diameter | 46 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 49 ° |
| for OE number | 960 350 34 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Weight | 2.9 kg |
| for OE number | 1375 508 |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Length | 1269 mm |
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| Diameter 1 | 60 mm |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Weight | 19.876 kg |
| Material | Steel |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| for OE number | 005 466 03 01 |
| Operating pressure to | 12 bar |
| Internal Thread Size | M16 x 1,5 |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Pulleys | with belt pulley |
| Mounting points diameter | 9 mm |
| Type | Hydraulic Pump, steering |
| Weight | 2.218 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Inner diameter | 82 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Width | 130 mm |
| Outer diameter | 138 mm |
| Weight | 6.0 kg |
| Placement on Vehicle | Front Axle |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Weight | 3.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 62 mm. 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Type | Clutch, radiator fan |
| Weight | 2.98 kg |
| Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| Additional Information | with adjuster |
| Weight | 0.938 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Weight | 0.562 kg |
| Type | Camshaft Adjuster |
| Number of Teeth | 42 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023