Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Solenoid Valve |
| Placement on Vehicle | Front Axle, Rear Axle |
| Voltage | 24 V |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ballast, gas discharge lamp |
| Extra Description | febi Plus |
| Placement on Vehicle | Left, Right |
| Number of Connectors / Ports | 7 |
| Type | Ballast, gas discharge lamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Hub |
| Inner diameter | 140 mm |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 337 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Clutch, radiator fan |
| Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| Current Strength | 55 A |
| Alternator Charge Current | 55 A |
| Pulleys | without belt pulley |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 005 466 03 01 |
| Operating pressure to | 12 bar |
| Internal Thread Size | M16 x 1,5 |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Pulleys | with belt pulley |
| Mounting points diameter | 9 mm |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| for OE number | 1375 508 |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 62 mm. 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Number of Chain Links | 158 |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48285)
- 1x Febi Guide, timing chain (107891)
- 1x Febi Guide, timing chain (108824)
- 1x Febi Gear/Sprocket, camshaft (108802)
- 1x Febi Sprocket, crankshaft (108825)
- 1x Febi Shaft Seal, crankshaft (107164)
Important compatibility info
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 194 |
| Function | Timing Chain Kit |
| Replaces | 30320 |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HP |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30498)
- 1x Febi Tensioner, timing chain (26750)
- 1x Febi Guide, timing chain (24273)
- 1x Febi Guide, timing chain (24274)
- 1x Febi Guide, timing chain (24275)
- 1x Febi Guide, timing chain (24276)
Important compatibility info
| Function | Multi-Function Switch |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Combi Switch Function | Window Regulator |
| Type | Multi-Function Switch |
| Placement on Vehicle | Passenger Side |
| Number of Connectors / Ports | 9. 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 146 mm |
| Outer diameter | 108 mm |
| Inner diameter | 88 mm |
| Number of Connectors / Ports | 3 |
| Function | Water Separator, fuel system |
| Type | Water Separator, fuel system |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 88 mm |
| Outer diameter | 280 mm |
| Inner diameter | 48 mm |
| Type | Vibration Damper, crankshaft |
| Function | Vibration Damper, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 15 |
| Rated Power | 2.0 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (47758)
- 1x Febi Gasket, oil pump (174425)
- 1x Febi Gasket, oil pump (173400)
- 3x Febi Screw (177756)
- 4x Febi Screw (180865)
Important compatibility info
| Piston conrod diameter | 12.4 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 320 mm |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Placement on Vehicle | Rear |
| Min. Length | 238 mm |
| Mounting points diameter | 12 mm |
| Operating Mode | Pneumatic |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 745 mm |
| Width | 145 mm |
| Spring Design | Leaf spring |
| Number of spring leaves | 1 |
| Type | Spring Pack |
| Function | Spring Pack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| for OE number | RF7J-12-205 S4 |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Number of Teeth | 150 |
| Width | 30 mm |
| Water pump impeller material | Metal |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173651)
- 1x Febi Water Pump, engine cooling (173468)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















