Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.39 kg |
| Number of Teeth | 87 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Units / Pulleys | incl. tensioner pulley |
| Width | 17 mm |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21249)
- 1x Febi Water Pump, engine cooling (39298)
£88.47
Important compatibility info
| Weight | 0.257 kg |
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 191 mm |
| Thickness | 16 mm |
| Inner diameter | 165 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.34
Important compatibility info
| Weight | 0.444 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Hose Length | 300 mm |
| for OE number | 17 12 7 536 230 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.46
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Weight | 0.134 kg |
| for OE number | 82 00 459 153 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.61
Important compatibility info
| Pipe Diameter | 10 mm |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Length | 151 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M12 x 1,25, M10 x 1,25 |
| Weight | 0.27 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.94
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Paired article numbers | 34796 |
| Placement on Vehicle | Right |
| Weight | 0.185 kg |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.18
Important compatibility info
| Weight | 1.14 kg |
| Placement on Vehicle | Rear |
| Length | 205 mm |
| Width | 18 mm |
| Outer diameter | 86 mm |
| Thickness | 125 mm |
| Inner diameter | 40 mm. 82 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.535 kg |
| Inner diameter | 25 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 52 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.18
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.623 kg |
| for OE number | 50890-T5A-003 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.37
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Weight | 0.160 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 148 mm |
| Spanner Size | 13 |
| Rod/Strut | Coupling Rod |
| Quality/ Grade | 10.9, 10 |
| DIN / ISO | 985 |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.54
Important compatibility info
| Paired article numbers | 193111 |
| Mounting points diameter | 13 mm |
| Placement on Vehicle | Front Axle Left |
| Piston conrod diameter | 22 mm |
| Max. Length | 518 mm |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Shock Absorber System | Twin-Tube |
| Weight | 3.620 kg |
| Min. Length | 339 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 51 mm |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.06
Important compatibility info
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with adjuster |
| Material | Plastic |
| Colour | Black |
| Weight | 2.0599 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (181564)
- 1x Febi Gasket, intake manifold (182287)
- 1x Febi Gasket, intake manifold housing (182288)
- 1x Febi Control, swirl covers (induction pipe) (170534)
£311.34
Important compatibility info
| Weight | 0.210 kg |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.70
Important compatibility info
| Placement on Vehicle | Centre, Rear Axle Left, Rear, Rear Axle Right |
| Weight | 0.423 kg |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Steering arm type | Control Arm |
| Additional Information 2 | with rubber mount, with ball joint |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.04
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 70 |
| Timing Chain Size | Z46 |
| Function | Chain, oil pump drive |
| Weight | 0.4 kg |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.85
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 2.82 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 104 mm |
| Outer diameter | 139 mm |
| Inner diameter | 38 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 118 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Weight | 3.62 kg |
| Number of Connectors / Ports | 5 |
| Type | EGR Module |
| Function | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£431.86
Important compatibility info
| Belt Pulley Diameter | 82 mm |
| Number of Ribs | 1 |
| Voltage | 12 V |
| Alternator Charge Current | 65 A |
| Type | Alternator |
| Weight | 6.74 kg |
| Function | Alternator |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£180.20
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.818 kg |
| Placement on Vehicle | Right, Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.12
Important compatibility info
| Number of Connectors / Ports | 2 |
| Screw length below head | 28 mm |
| Spanner Size | 22 |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, coolant temperature |
| Length | 64 mm |
| Weight | 0.035 kg |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.64
Important compatibility info
| Length | 425 mm |
| Spanner Size | 17 |
| Weight | 0.15 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.00
Important compatibility info
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 64 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.093 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101961)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 44.5 mm |
| Width | 30 mm |
| Material | Rubber/Metal |
| Outer diameter | 30.1 mm |
| Thickness | 45 mm |
| Inner diameter | 14.2 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.08 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.63
Important compatibility info
| Placement on Vehicle | Lower Front Axle |
| Outer diameter | 60 mm. 33 mm |
| Thickness | 87 mm |
| Inner diameter | 20 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.263 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.50
Important compatibility info
| Function | Coolant Pipe |
| Cooling Hose | from thermostat to waterpump |
| Material | Plastic |
| Weight | 0.134 kg |
| Length | 342 mm |
| Extra Description | febi Plus |
| Type | Coolant Pipe |
| Additional Information 2 | with retaining strap, with clip, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clip (103137)
- 1x Febi Coolant Pipe (103136)
£25.37
Important compatibility info
| Function | Expansion Tank, coolant |
| Material | PP (Polypropylene) |
| Number of Connectors / Ports | 2 |
| Weight | 0.58 kg |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.81
Important compatibility info
| Weight | 0.05 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Width | 57 mm |
| Length | 51 mm |
| Placement on Vehicle | Front Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.57
Important compatibility info
| Weight | 0.424 kg |
| External Thread Size | M18 x 1,5, M14 x 1,5 |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 187 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.92
Important compatibility info
| Weight | 0.150 kg |
| Height | 116 mm |
| Colour | Orange |
| Type | Lens, rotating beacon |
| Function | Lens, rotating beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.32
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1910 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.94
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023