Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 80 |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | G53H-6, G53HRF-1 |
| Type | Chain Kit, oil pump drive |
| Wet Boiling Point | 189 °C |
| Replaces | 43667 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25388)
- 1x Febi Gear, balance shaft (25451)
- 1x Febi Gear, balance shaft (25453)
- 1x Febi Sprocket/Gear, oil pump (25454)
- 1x Febi Chain Tensioner, oil pump drive (32265)
Important compatibility info
| Alternator Charge Current | 90 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Belt Pulley Diameter | 62 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Voltage | 12 V |
| Function | Alternator |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Current Strength | 90 A |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 167 mm |
| Inner diameter | 34 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side |
| Material | Plastic |
| Paired article numbers | 172921 |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 225 mm |
| Width | 131 mm |
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
| Exhaust Emission Norm | Euro 6 |
| Voltage | 24 V |
| Type | NOx Sensor, urea injection |
| Cable Length | 890 mm |
| Placement on Vehicle | after catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 510 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 140 |
| Placement on Vehicle | Right |
| Paired article numbers | 30339 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| Timing Chain Size | Z53R |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29522)
- 1x Febi Guide, timing chain (28724)
- 1x Febi Guide, timing chain (24919)
- 1x Febi Guide, timing chain (28723)
- 2x Febi Sliding Rail Bolts, timing chain (109475)
Important compatibility info
| Housing material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of grooves | 10 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Bore Diameter | 21 mm |
| Steering arm type | Trailing Arm |
| Length | 608 mm |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Chain Links | 162 |
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| for OE number | 12761-54G00 S1 |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49720)
- 1x Febi Tensioner, timing chain (109038)
- 1x Febi Guide, timing chain (109040)
- 1x Febi Guide, timing chain (109041)
Important compatibility info
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Material | Plastic |
| Paired article numbers | 172924 |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















