Important compatibility info
| Additional Information | with synthetic grease |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Outer diameter | 310 mm |
| Number of Teeth | 10 |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clutch Pressure Plate (105311)
- 1x Febi Clutch Disc (105029)
- 1x Febi Clutch Release Bearing (105434)
Important compatibility info
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Operating Mode | Mechanical |
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 230 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with seal ring |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31296)
- 1x Febi Shaft Seal, crankshaft (31329)
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rated Power | 6.7 kW |
| for OE number | 1 332 903 |
| Type | Starter |
| Number of Teeth | 11 |
| Function | Starter |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Number of Connectors / Ports | 2 |
| Function | Actuator, exentric shaft (variable valve lift) |
| Extra Description | febi Plus |
| Type | Actuator, exentric shaft (variable valve lift) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | switchable water pump |
| Water pump impeller material | Plastic |
| Number of Wings | 8 |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Clutch Pressure Plate |
| Outer diameter | 362 mm |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 24.3 mm. 38 mm |
| Length | 667 mm |
| Function | Tilt Cylinder, driver cab |
| Type | Tilt Cylinder, driver cab |
| Extra Description | febi Plus |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Stroke | 458 mm |
| Number of Connectors / Ports | 2 |
| Outer diameter | 68 mm. 53 mm |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Basic Short Kit |
| for OE number | 12675634 S1 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 170 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (106695)
- 1x Febi Guide, timing chain (106687)
- 1x Febi Guide, timing chain (106632)
- 1x Febi Guide, timing chain (106640)
Important compatibility info
| Rated Power | 7 kW |
| Voltage | 24 V |
| Number of Teeth | 12 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water pump, traction battery |
| Placement on Vehicle | Right Front |
| Type | Water pump, traction battery |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 580 mm |
| Min. Length | 350 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Replaces | 20147 |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 6Q0 820 803 G |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 110 mm |
| Oil Fill Quantity | 150 ml |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle, from 1st to 2nd intermediate steering lever |
| Length | 1950 mm |
| Pipe Diameter | 62 mm |
| Function | Centre Rod Assembly |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 13 62 7 788 744 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 11 |
| Rated Power | 6.2 kW |
| for OE number | 004 151 90 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 1036 mm |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
| Multi-piece | one-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Fill quantity | 14 l |
| Length | 428 mm |
| Height | 239 mm |
| Width | 380 mm |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Opening pressure | 40 kPa |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 545.8 mm |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Housing Diameter | 35.9 mm |
| Stroke | 144 mm |
| Type | Gas Spring, gull-wing door |
| Function | Gas Spring, gull-wing door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 545.8 mm |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Housing Diameter | 35.9 mm |
| Stroke | 144 mm |
| Type | Gas Spring, gull-wing door |
| Function | Gas Spring, gull-wing door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 669 mm |
| Operating Mode | Electric |
| Housing Diameter | 35 mm |
| Stroke | 187 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 58 0166 0699 |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi EGR Valve (109640)
- 1x Febi Gasket, EGR valve (170584)
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 3 |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 9 |
| Rated Power | 5.4 kW |
| for OE number | 005 151 27 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Starter |
| Voltage | 24 V |
| Function | Starter |
| Rated Power | 8.3 kW |
| Number of Teeth | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























