Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Type | Brake Hose |
Length | 785 mm |
Paired article numbers | 185029 |
Weight | 0.225 kg |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Function | Filter, cabin air |
Length | 240 mm |
Height | 35 mm |
Filter type | Activated Carbon Filter |
Width | 203 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.341 kg |
Height | 110 mm. 157 mm |
Outer diameter | 80 mm |
Number of Connectors / Ports | 2 |
Function | Fuel filter |
Filter type | In-Line Filter, with water separator |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 19.5 mm |
External Thread Size | M16 x 1,5, M10 x 1,25 |
Mounting points diameter | 10.8 mm |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Weight | 1.03 kg |
Additional Information | with crown nut and split pin |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Cast Steel |
Function | Idler Arm |
Type | Idler Arm |
Weight | 1.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front, Right Front |
Weight | 0.015 kg |
Number of Connectors / Ports | 4 |
Extra Description | febi Plus |
Type | Switch, window regulator |
Function | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.9 kg |
Outer diameter | 600 mm |
Thickness | 92 mm |
Number of Wings | 8 |
Function | Fan Wheel, engine cooling |
Type | Fan Wheel, engine cooling |
for OE number | 51.06601.0266 |
Hole Spacing | 97 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Weight | 0.97 kg |
Length | 208 mm |
Function | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M27 x 1,5, M20 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 105 mm |
Thickness | 10 mm. 11 mm |
Inner diameter | 88 mm |
Function | Seal Ring, drive shaft mounting |
Weight | 0.080 kg |
Type | Seal Ring, drive shaft mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Length | 148 mm |
Width | 92 mm |
Filter type | Pollen Filter |
Function | Filter Set, cabin air |
Height | 21 mm. 26 mm |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Inner diameter | 100 mm |
Additional Information 2 | with flange |
Outer diameter | 250 mm |
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
Material | Rubber/Metal |
Outer diameter | 79.5 mm |
Thickness | 80 mm |
Additional Information 2 | with mounting sleeve |
Inner diameter | 14.2 mm |
Paired article numbers | 182262 |
Weight | 0.604 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
for OE number | 213 333 09 00 |
Caster correction | +3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | with screw |
Thread Size | M10x1,5 |
External Teeth, Wheel Side | 36 |
Weight | 5.895 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 789 mm |
Wheel Sided Joint Diameter | 71.9 mm |
Transmission-side joint diameter | 72 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 190 |
Function | Timing Chain Kit |
Replaced by | 48382 |
Chain Type | Duplex, with chain lock |
Timing Chain Size | D67HR, D67HP |
Type | Timing Chain Kit |
Weight | 2.260 kg |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 102.3 mm |
Width | 45.4 mm |
Additional Information 2 | with anti-squeak plate, with bolts/screws |
Wear Warning Contact | not prepared for wear warning indicator |
Inspection Tag | ECE R90 Approval |
Weight | 0.900 kg |
Thickness/Strength 1 | 15 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wiper Motor |
Number of Connectors / Ports | 4 |
Placement on Vehicle | Rear |
Voltage | 12 V |
Weight | 0.9 kg |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 30 mm |
Additional Information 2 | with ball bearing |
Length | 156 mm |
Placement on Vehicle | Centre |
Hole Spacing | 130 mm |
Function | Suspension, propshaft |
Bearing Type | Rolling Bearing |
Weight | 0.643 kg |
Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Steel |
Outer diameter | 218 mm |
Inner diameter | 202 mm |
Weight | 0.590 kg |
Number of Teeth, ABS ring | 100 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.52 kg |
Voltage | 24 V |
Number of Teeth | 11 |
Rated Power | 4 kW |
Function | Starter |
Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 19 mm |
Width | 5 mm |
Thickness | 16 mm |
Function | Retaining Clip, bonnet noise insulation |
Weight | 0.05 kg |
Type | Retaining Clip, bonnet noise insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Inner diameter | 14 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Thickness | 79 mm |
Outer diameter | 82 mm |
Type | Bushing, axle beam |
Replaces | 30404 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 65 mm |
Inner diameter 1 | 34 mm |
Function | Bellow Kit, drive shaft |
Material | Thermoplast |
Weight | 0.142 kg |
Type | Bellow Kit, drive shaft |
Length | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (49888)
- 1x Febi Clamping Clip (45640)
- 1x Febi Clamping Clip (100579)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Additional Information | with solenoid valve |
Additional Information 2 | switchable water pump, with integrated disabling contact |
Weight | 0.800 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 05023 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 5.277 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Placement on Vehicle | Front Axle Right |
Length | 136 mm |
Paired article numbers | 26635 |
Function | Tie Rod End |
Type | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Number of grooves | 8 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Material | Aluminium |
Additional Information | with gaskets/seals |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Weight | 0.081 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 200 mm |
Material | Thermoplast |
Inner diameter 1 | 12 mm |
Inner diameter 2 | 53 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101723)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (100698)
Important compatibility info
Weight | 0.08 kg |
Placement on Vehicle | Front Axle |
Length | 50.2 mm |
Width | 50 mm |
Material | Rubber |
Outer diameter | 51 mm |
Thickness | 62.5 mm |
Inner diameter | 28.6 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.053 kg |
Colour | Black |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.6 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 126 mm |
Outer diameter | 91 mm |
Inner diameter | 49 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023