Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 746 mm |
| Min. Length | 456 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.95
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 5 |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.96
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.01
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | with bolts/screws, with spacer plate |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.23
Important compatibility info
| Additional Information 2 | Brushless Motor |
| Driver Position | for right-hand drive vehicles |
| Type | Interior Blower |
| Function | Interior Blower |
| Number of Connectors / Ports | 6 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.46
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 84 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.47
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.58
Important compatibility info
| Pressure side external thread size | M12 x 1 |
| Suction side external thread size | M12 x 1 |
| Function | Tilt Cylinder, driver cab |
| Length | 603 mm |
| Outer diameter | 55 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 359 mm |
| Mounting points diameter | 25 mm |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.20
Important compatibility info
| Additional Information | with gasket/seal |
| Colour | Black |
| Extra Description | febi Plus |
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.27
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.41
Important compatibility info
| Function | EGR Valve |
| Operating Mode | Electric |
| Valve head diameter | 31.3 mm |
| Number of Connectors / Ports | 5 |
| Additional Information | with gasket/seal |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.41
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 11 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 77 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.45
Important compatibility info
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.45
Important compatibility info
| Type | Cable Set, automatic transmission |
| Function | Cable Set, automatic transmission |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.45
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Paired article numbers | 177744 |
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.45
Important compatibility info
| Function | Camshaft Adjuster |
| Paired article numbers | 177704 |
| Type | Camshaft Adjuster |
| Extra Description | febi Plus |
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.45
Important compatibility info
| Type | Crankshaft, air compressor |
| Function | Crankshaft, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.47
Important compatibility info
| Additional Information | without gasket/seal |
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
| for OE number | 1 468 762 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.59
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 890 mm |
| Min. Length | 578 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.93
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 2 |
| Type | Bellow, air suspension |
| Outer diameter | 273 mm. 228 mm |
| Function | Bellow, air suspension |
| Thickness | 204 mm. 676 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.37
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 546 mm |
| Type | Gas Spring, boot/cargo area |
| Housing Diameter | 36 mm |
| Function | Gas Spring, boot/cargo area |
| Extra Description | febi Plus |
| Operating Mode | Electric |
| Stroke | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.38
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.44
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 10 |
| Rated Power | 4 kW |
| Function | Starter |
| Type | Starter |
| for OE number | 58 0157 7135 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.44
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 9 |
| Rated Power | 5.5 kW |
| Function | Starter |
| Type | Starter |
| Replaces | 48966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.44
Important compatibility info
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.44
Important compatibility info
| Length | 651 mm |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Outer diameter | 60 mm |
| Stroke | 391 mm |
| Mounting points diameter | 22 mm |
| Function | Tilt Cylinder, driver cab |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.49
Important compatibility info
| Length | 940 mm. 1663 mm |
| Inner diameter | 16 mm. 25 mm |
| Stroke | 723 mm |
| Function | Tilt Cylinder, driver cab |
| External Thread Size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.60
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
| for OE number | 164 320 12 04 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.85
Important compatibility info
| Function | High-pressure Pump |
| Type | High-pressure Pump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£203.87
Important compatibility info
| Length | 3770 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| for OE number | 50 01 868 535 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.43
Important compatibility info
| Length | 3860 mm |
| Type | Cable Pull, manual transmission |
| for OE number | 50 01 868 534 |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.43
Important compatibility info
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Type | Oil sump |
| Additional Information 2 | with seal ring |
| Additional Information | with oil drain plug |
| Length | 475 mm |
| Function | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.43
Important compatibility info
| Type | Oil Pump |
| Additional Information | with gasket/seal |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.43
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Stroke | 161 mm |
| Housing Diameter | 36 mm |
| Extra Description | febi Plus |
| Placement on Vehicle | both sides |
| Length | 580 mm |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.82
Important compatibility info
| Stroke | 405 mm |
| Mounting points diameter | 20 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Length | 559 mm |
| Outer diameter | 45 mm |
| Number of Connectors / Ports | 2 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.83
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | with spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.87
Important compatibility info
| Outer diameter | 50 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 525 mm |
| Mounting points diameter | 25 mm |
| Function | Tilt Cylinder, driver cab |
| Length | 861 mm |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£204.88
Important compatibility info
| Internal Thread Size | M22 x 1,5, M8 x 1,25 |
| Function | Directional Control Valve Block, air suspension |
| Type | Directional Control Valve Block, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£205.06
Important compatibility info
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Number of Teeth | 44 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£205.42
Important compatibility info
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£205.42
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£205.42
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
| Additional Information | with gaskets/seals |
| Type | Fitting, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£205.90
Important compatibility info
| Length | 696 mm |
| Outer diameter | 55 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 357 mm |
| Mounting points diameter | 25 mm. 26 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tilt Cylinder, driver cab (44936)
- 1x Febi Cover, driver cab tilt cylinder (40798)
- 1x Febi Cable Tie (07026)
£205.96
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Air Suspension Valve |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.07
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 576 mm |
| Housing Diameter | 36 mm |
| Stroke | 161 mm |
| Type | Gas Spring, boot/cargo area |
| Operating Mode | Electric |
| Extra Description | febi Plus |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.37
Important compatibility info
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 77 mm |
| Function | Alternator |
| Alternator Charge Current | 100 A |
| Type | Alternator |
| Voltage | 24 V |
| Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.41
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 11 |
| Rated Power | 4 kW |
| Type | Starter |
| Function | Starter |
| for OE number | 51.26201.7236 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.41
Important compatibility info
| Outer diameter | 362 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
| for OE number | 1409 364 R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.41
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Plastic |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.41
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.41
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023