Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.03 kg |
Type | Sensor, boost pressure |
Function | Sensor, boost pressure |
for OE number | 038 906 051 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | EGR Module |
Function | EGR Module |
Weight | 4.06 kg |
for OE number | 059 131 515 FJ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.010 kg |
Paired article numbers | 32862 |
Function | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 380 mm |
Thickness | 68 mm |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Solid |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 180 mm |
Surface | Coated |
Function | Brake Disc |
Placement on Vehicle | Rear Axle, Front Axle |
Weight | 20.0 kg |
Internal Thread Size | M18 x 1,5 |
Rim Hole Number | 8 -Hole |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 361 mm |
Height | 40 mm |
Width | 159 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Weight | 0.09 kg |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 20 mm |
Function | Centre Rod Assembly |
External Thread Size | M16 x 1,5 |
Additional Information | with nuts |
Outer diameter | 32 mm |
Placement on Vehicle | Front Axle |
Rod/Strut | Push Rod |
Length | 825 mm |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Replaces | 35353 |
Internal Thread Size | M24 x 1,5 RHT |
Weight | 3.720 kg |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.318 kg |
Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 59 mm |
Thickness | 111 mm |
Inner diameter | 17 mm |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 46 mm |
for OE number | 541 200 23 70 |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Weight | 1.542 kg |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.8 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 715 mm |
Min. Length | 430 mm |
Pipe Diameter | 63 mm. 75 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 16 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.390 kg |
Placement on Vehicle | Front and Rear, Front Axle |
Length | 95 mm |
Material | Rubber/Metal |
Outer diameter | 44 mm |
Inner diameter | 16 mm |
Type | Bush, spring eye |
Function | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1115 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Weight | 0.145 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 105 mm |
Material | Metal |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.230 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 25 |
Paired article numbers | 182627 |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
Min. Length | 857 mm |
Wheel Sided Joint Diameter | 86 mm |
Transmission-side joint diameter | 79 mm |
Type | Drive Shaft |
External Teeth, Diff.Side | 24 |
Function | Drive Shaft |
Additional Information | with Split Pin |
Placement on Vehicle | Front Axle Right |
Weight | 7.194 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 21.3 kg |
Rim Hole Number | 10 -Hole |
Outer diameter | 376 mm |
Thickness | 57.5 mm |
Brake Disc Thickness | 45 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 39 mm |
Bolt Hole Circle Diameter | 190 mm |
Surface | Coated |
Function | Brake Disc |
Placement on Vehicle | Rear Axle |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1130 mm |
Number of Ribs | 6 |
Weight | 0.990 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (27835)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (47861)
Important compatibility info
Function | Cable Pull, clutch control |
Type | Cable Pull, clutch control |
Weight | 0.330 kg |
Inner Length | 387 mm |
Outer Length | 590 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Length | 876.5 mm. 561 mm |
Mounting points diameter | 40 mm |
Function | Shock Absorber, steering |
Pipe Diameter | 50 mm. 60 mm. 34 mm |
Stroke | 313 mm |
Cone Size | 18 mm |
External Thread Size | M14 x 1,5 |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Pressure converter, turbocharger |
Voltage | 12 V |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Weight | 0.20 kg |
Function | Pressure converter, turbocharger |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 215 mm |
Paired article numbers | 106846 |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Weight | 0.779 kg |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Material | NBR (nitrile butadiene rubber) |
Weight | 0.048 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023