Proud to be a UK-based company
Contact us
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Bore Diameter | 9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.00
Important compatibility info
| Outer diameter | 93 mm |
| Height | 191 mm |
| Type | Fuel filter |
| Housing material | Plastic |
| Function | Fuel filter |
| Filter type | In-Line Filter, with water drain screw, with connection for water sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.88
Important compatibility info
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.25
Important compatibility info
| Hub internal diameter | 60 mm |
| Hub fastening hole diameter | 15 mm |
| Pitch circle diameter, clutch pressure plate | 375 mm |
| Number of hub fastening holes | 8 |
| Pitch circle diameter, hub | 85 mm |
| Number of EDC bores/notches | 4 |
| External diameter, clutch pressure plate | 363 mm |
| Running surface internal diameter | 190 mm |
| Function | Flywheel |
| Additional Information | with starter motor sprocket |
| Number of Teeth | 129 |
| Type | Flywheel |
| Number of clutch pressure plate fastening holes | 9 |
| Hub external diameter | 122 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£368.76
Important compatibility info
| Height | 184 mm |
| Outer diameter | 90 mm |
| Additional Information 2 | with seal ring |
| Filter type | In-Line Filter, with filter heating |
| Number of Connectors / Ports | 2 |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
| Gasket outer diameter | 22 mm |
| Gasket inner diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.61
Important compatibility info
| Material | ACM (Polyacrylate) |
| for OE number | 471 016 05 21 |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.54
Important compatibility info
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 34 mm |
| Outer diameter | 252 mm |
| Rotor Style | solid |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 8 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Centering Diameter | 62 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.44
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo REMAN |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£661.57
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£555.49
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£182.88
Important compatibility info
| for OE number | 1783 192 |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£229.66
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (35395)
- 1x Febi Fuel filter (171330)
- 1x Febi Air Filter (40548)
- 1x Febi Filter, cabin air (23581)
- 1x Febi Air Filter, compressor intake (38976)
£84.92
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Length | 255 mm |
| Outer diameter | 103 mm |
| Wire Diameter | 10.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.50
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.81
Important compatibility info
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 82 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Width | 65 mm |
| Inner diameter | 29 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (173435)
£64.14
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 24 |
| Min. Length | 870 mm |
| Wheel Sided Joint Diameter | 86.1 mm |
| Transmission-side joint diameter | 80.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.37
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193402 |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Thickness | 140 mm. 525 mm |
| Additional Information | with piston |
| Outer diameter | 286 mm. 260 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M12 x 1,75, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.76
Important compatibility info
| Thickness | 145 mm. 480 mm |
| Outer diameter | 228 mm. 198 mm |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.19
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023