Important compatibility info
Placement on Vehicle | Front Axle |
Length | 155.2 mm. 156.5 mm |
Width | 75.3 mm. 74.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.7 mm. 18.4 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 133.2 mm |
Width | 53 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.060 kg |
Filter type | Filter Insert |
Inner diameter | 120 mm |
Outer diameter | 187 mm. 206 mm |
Height | 591 mm |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Outer diameter | 145 mm |
Inner diameter | 85 mm |
Function | Shaft Seal, differential |
Material | FPM (fluoride rubber) |
Width | 12 mm. 37 mm |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 138.8 mm |
Width | 64 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 121.2 mm |
Thickness/Strength 1 | 16.8 mm |
Wear Warning Contact | prepared for wear warning indicator |
Width | 86.1 mm |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Shock Absorber |
Pipe Diameter | 63.4 mm. 54 mm |
Piston conrod diameter | 15 mm |
Max. Length | 484 mm |
Min. Length | 303 mm |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Shock Absorber Design | Telescopic Shock Absorber |
Shock Absorber Type | Oil Pressure |
Function | Shock Absorber |
Weight | 4.05 kg |
Placement on Vehicle | Rear Axle |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ignition Switch |
Number of Connectors / Ports | 8 |
Length | 63 mm |
Control Type | Rotary Operation |
Weight | 0.085 kg |
Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 318 mm |
Thickness | 155 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 7 |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Hole Spacing | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Height | 462 mm |
Outer diameter | 308 mm |
Inner diameter | 176 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PA (polyamide) |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Type | Cylinder Head Cover |
Additional Information | with gasket/seal |
Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Type | with housing |
Number of Connectors / Ports | 4 |
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Additional Information | with gasket/seal |
Type | Mass Air Flow Sensor |
for OE number | 1920.QV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rated Power | 400 W |
Number of Wings | 6 |
Function | Fan, engine cooling |
Extra Description | febi Plus |
Type | Fan, engine cooling |
Additional Information 2 | Brushless Motor, with radiator fan shroud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 147.7 mm |
Width | 63 mm. 58 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.234 kg |
Placement on Vehicle | Rear Axle |
Width | 62 mm |
Outer diameter | 300 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 5.5 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Weight | 0.680 kg |
Width | 24 mm |
Number of Teeth | 104 |
Surface | Coated |
for OE number | 14400-P1H-E01 S1 |
Belts | with rounded tooth profile |
Type | Timing Belt Kit |
Function | Timing Belt Kit |
Units / Pulleys | incl. tensioner pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (17219)
- 1x Febi Tensioner Pulley, timing belt (18937)
Important compatibility info
Extra Description | ProKit |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 23.7 mm |
Paired article numbers | 176677 |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint, with bearing |
Material | Aluminium |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Front Axle Right, Lower, Front |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174778)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Type | Sensor, exhaust pressure |
Function | Sensor, exhaust pressure |
Number of Connectors / Ports | 3 |
Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 10 mm |
Outer diameter | 55 mm |
Material | Plastic |
Type | Deflection Pulley/Guide Pulley, timing belt |
Width of castor bearing surface | 30 mm |
Function | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with quick coupling |
for OE number | 1K0 122 291 R |
Type | Coolant Flange |
Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Type | Housing Cover, crankcase |
Function | Housing Cover, crankcase |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Bolt Hole Circle Diameter | 112 mm |
Outer diameter | 345 mm |
Thickness | 54 mm |
Centering Diameter | 67 mm |
Rim Hole Number | 5 -Hole |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Brake Disc Thickness | 22 mm |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Minimum thickness | 19.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Type | Camshaft |
Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Additional Information | with gasket/seal |
Extra Description | febi Plus |
Placement on Vehicle | Cylinder Head Cover |
for OE number | 22410-2G100 |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Propshaft, axle drive |
Length | 1382 mm |
Placement on Vehicle | Rear |
Type | Propshaft, axle drive |
Multi-piece | two-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width 1 | 24.3 mm |
Additional Information 2 | with seal ring |
Outer diameter | 52 mm |
Width | 22.3 mm |
Inner diameter | 20 mm |
Inner diameter 1 | 35 mm |
Sealing lip material | NBR (nitrile butadiene rubber) |
Outer diameter 1 | 72 mm |
Placement on Vehicle | Front Axle |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 03L 145 771 B S1 |
Type | Oil Line, charger |
Forward- /Backflow | Supply Line |
Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 48 mm. 24 mm |
Thickness | 45 mm |
Inner diameter | 14 mm |
Placement on Vehicle | Lower Front Axle, Rear |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 60 mm |
Material | Rubber |
Outer diameter | 51 mm |
Inner diameter | 23 mm |
Placement on Vehicle | Front Axle, inner |
Function | Mounting, stabiliser bar |
Thickness | 50 mm |
Width | 53 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 50 mm |
Material | Rubber/Metal |
Outer diameter | 40 mm |
Inner diameter | 12 mm |
Paired article numbers | 05214 |
Function | Mounting, panhard rod |
Placement on Vehicle | Body side |
Type | Mounting, panhard rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 193 mm |
Width | 75 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, both sides |
Material | Rubber/Metal |
Outer diameter | 48 mm. 55 mm |
Thickness | 25 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 192.2 mm. 193 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 20 mm. 19 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Width | 79.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake System | Brembo |
Length | 114.5 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Width | 91.4 mm |
Placement on Vehicle | Front Axle |
Thickness/Strength 1 | 18.3 mm |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with rubber mounts |
Material | Aluminium |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 197244 |
Cone Size | 15.2 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 21.7 mm |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.090 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 44 mm. 52.3 mm |
Thickness | 23 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 110 mm |
Width | 110 mm |
Material | Rubber/Metal |
Outer diameter | 110 mm |
Thickness | 66 mm |
Inner diameter | 71 mm |
Function | Mounting, stabiliser bar |
Placement on Vehicle | Front Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.03 kg |
Function | Shock Absorber |
Mounting points diameter | 16 mm |
Pipe Diameter | 60 mm. 70 mm |
Min. Length | 400 mm |
Max. Length | 615 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Shock Absorber Design | Telescopic Shock Absorber |
Type | Shock Absorber |
Piston conrod diameter | 16 mm |
Shock Absorber Type | Oil Pressure |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 55 mm. 30 mm |
Thickness | 55 mm |
Inner diameter | 19 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Inner diameter | 25 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Length | 39 mm |
Outer diameter | 35 mm |
Inner diameter | 24 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Surface | Coated |
Number of mounting bores | 1 |
Minimum thickness | 26 mm |
Centering Diameter | 70 mm |
Brake Disc Thickness | 28 mm |
Bolt Hole Circle Diameter | 110 mm |
Thickness | 45.1 mm |
Outer diameter | 305 mm |
Placement on Vehicle | Front Axle |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with rubber mounts |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 193293 |
Cone Size | 20 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Additional Information | with fastening/mounting material |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (34884)
- 1x Febi Camber Correction Screw (188574)
- 1x Febi Washer (177872)
- 2x Febi Nut (14392)
- 1x Febi Fastening Bolt, control arm (173406)
Important compatibility info
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Outer diameter | 47.5 mm |
Thickness | 59 mm |
Function | Bushing, axle beam |
Weight | 0.257 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023