Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 7.5 mm |
Material | Steel |
Outer diameter | 85 mm |
Inner diameter | 75 mm |
Number of Teeth, ABS ring | 38 |
Function | Sensor Ring, ABS |
Weight | 0.05 kg |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 670 mm |
Function | Cable Pull, parking brake |
Weight | 0.2 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Length | 396 mm |
Function | Brake Hose |
Weight | 0.11 kg |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.245 kg |
Placement on Vehicle | Front Axle Left, Rear, Lower, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 53 mm |
Thickness | 50 mm |
Inner diameter | 19 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | 3/4" - 16 UNF |
Weight | 0.386 kg |
Height | 120 mm |
Outer diameter | 76 mm |
Filter type | Spin-on Filter |
Type | Oil Filter |
Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 308 mm |
Height | 67 mm |
Width | 153 mm |
Filter type | Filter Insert |
Weight | 0.420 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 75 mm |
Material | PU (Polyurethane) |
Placement on Vehicle | Front Axle |
Weight | 0.059 kg |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.080 kg |
Length | 176 mm |
Outer diameter | 50 mm |
Filter type | In-Line Filter |
Number of Connectors / Ports | 2 |
Function | Fuel filter |
Type | Fuel filter |
Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle, Front Axle |
Weight | 0.018 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.093 kg |
Voltage | 12 V |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Number of Connectors / Ports | 2 |
Replaces | 09088; 12793; 26257 |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.080 kg |
Placement on Vehicle | Front Axle |
Length | 250 mm |
Material | Plastic |
Inner diameter 1 | 84 mm |
Inner diameter 2 | 69 mm |
Function | Protective Cap/Bellow, shock absorber |
Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.149 kg |
Placement on Vehicle | Rear Axle |
Thickness | 17 mm |
Number of Knobs | 4 |
Outer diameter | 105 mm |
Inner diameter | 63 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.230 kg |
Outer diameter | 55 mm. 68 mm |
Thickness | 45 mm |
Inner diameter | 18 mm |
Paired article numbers | 08945 |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Lower Front Axle, Right Rear |
Material | Rubber/Metal |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 102 mm |
Outer diameter | 92 mm |
Inner diameter | 27 mm |
Filter type | Filter Insert |
Function | Fuel filter |
Weight | 0.190 kg |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Length | 260 mm |
Height | 48 mm |
Width | 132 mm |
Weight | 0.3 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Rubber Buffer, suspension |
Weight | 0.120 kg |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Width | 62 mm |
Length | 127 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.058 kg |
Placement on Vehicle | transmission sided |
Material | FPM (fluoride rubber) |
Outer diameter | 105 mm |
Thickness | 11 mm |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Thickness | 2.5 mm |
Weight | 0.006 kg |
Type | Gasket, timing case |
Function | Gasket, timing case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
Length | 81 mm |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 62 mm |
Function | Bellow Kit, drive shaft |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03312)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 19 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.031 kg |
External Thread Size | M10 x 1 |
Number of Connectors / Ports | 1 |
Colour Coding | Green |
Function | Oil Pressure Switch |
Switch point to | 0.6 bar |
Switch point from | 0.3 bar |
Spanner Size | 22 |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 243 mm |
Height | 77 mm |
Width | 169 mm |
Filter type | Filter Insert |
Function | Air Filter |
Weight | 0.34 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane), Rubber |
Placement on Vehicle | Front Axle |
Length | 162 mm |
Outer diameter | 58 mm |
Inner diameter | 10 mm |
Function | Dust Cover Kit, shock absorber |
Replaces | 36988 |
Type | Dust Cover Kit, shock absorber |
Weight | 0.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.246 kg |
Width | 16 mm |
Outer diameter | 75 mm |
Inner diameter | 45 mm |
Function | Bearing, propshaft centre bearing |
Type | Bearing, propshaft centre bearing |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.81 kg |
Length | 1418 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.009 kg |
Function | Shaft Seal, crankshaft |
Placement on Vehicle | frontal sided |
Width | 7 mm |
Inner diameter | 31 mm |
Rotation Direction | Clockwise rotation |
Type | Shaft Seal, crankshaft |
Outer diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.30 kg |
Length | 291 mm |
Height | 45 mm |
Width | 224 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Height | 157 mm |
Outer diameter | 64 mm |
Inner diameter | 29 mm. 31 mm |
Filter type | Filter Insert |
Weight | 0.070 kg |
Type | Oil Filter |
Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.110 kg |
External Thread Size | M10 x 1,5 |
Internal Thread Size | M12 x 1,75 LHT |
Placement on Vehicle | transmission sided |
Extra Description | ProKit |
Length | 68 mm |
Type | Ball Head, gearshift linkage |
Function | Ball Head, gearshift linkage |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 290 mm |
Rod/Strut | Coupling Rod |
Quality/ Grade | 10 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.33 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023