Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
| Width | 45 mm |
| Length | 162 mm |
| Additional Information | with bump stop |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 175 mm |
| Thickness | 8 mm |
| Inner diameter | 145 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Right |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
| Paired article numbers | 183126 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 253 mm |
| Height | 30 mm |
| Width | 83 mm |
| Filter type | Pollen Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Height | 90 mm |
| Outer diameter | 77 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 38.5 mm |
| Width | 41 mm |
| Material | Rubber |
| Thickness | 41 mm |
| Inner diameter | 18 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Left |
| Paired article numbers | 171426 |
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 103 mm |
| Outer diameter | 84 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 76 mm |
| Type | Oil Filter |
| Internal Thread Size | M26 x 1,5 |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 52 mm |
| Material | Rubber/Metal |
| Length | 57 mm |
| Type | Mounting, stabiliser bar |
| Width | 50 mm |
| Function | Mounting, stabiliser bar |
| Inner diameter | 30 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Roller Guide, sliding door |
| Placement on Vehicle | both sides, Upper |
| Type | Roller Guide, sliding door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 19.00 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Internal Thread Size | M12 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1400 mm |
| Paired article numbers | 17907 |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 1410 mm |
| Paired article numbers | 17905 |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mount, exhaust system |
| Function | Mount, exhaust system |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 550 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 371 mm |
| Height | 33 mm |
| Width | 167 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 145 mm |
| Outer diameter | 78 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Housing material | Sheet Steel |
| Function | Oil Filter |
| Gasket outer diameter | 72 mm |
| Gasket inner diameter | 63 mm |
| Internal Thread Size | 3/4" - 16 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 120 mm |
| Width | 76 mm |
| Material | Rubber/Metal |
| Thickness | 57 mm |
| Mounting points diameter | 8 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 84 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
| Type | Oil Filter |
| Height | 162 mm |
| Inner diameter | 25 mm |
| Inner diameter 1 | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 36.6 mm |
| Width | 22.85 mm |
| Thickness | 15.35 mm |
| Voltage | 24 V |
| Function | Relay, main current |
| Number of Connectors / Ports | 5 |
| Type | Relay, main current |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, oil cooler |
| Type | Gasket Set, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 180 mm |
| Length | 252 mm |
| Height | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 18 mm |
| Function | Mounting Kit, stabiliser bar |
| for OE number | 6Q0 411 314 R S4 |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (27642)
- 1x Febi Bracket, stabiliser mounting (37145)
- 1x Febi Bracket, stabiliser mounting (37146)
- 4x Febi Screw (37063)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 17 mm |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (27640)
- 1x Febi Bracket, stabiliser mounting (37145)
- 1x Febi Bracket, stabiliser mounting (37146)
- 4x Febi Screw (37063)
Important compatibility info
| Length | 205 mm |
| Height | 86 mm |
| Width | 170 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.1 mm |
| Outer diameter | 42.5 mm |
| Material | Rubber/Metal |
| Length | 50 mm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Front, Outer, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 109 mm |
| Paired article numbers | 40882 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 109 mm |
| Paired article numbers | 40881 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























