Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Seal, oil filler neck cap |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 59 mm |
| Thickness | 2.1 mm |
| Inner diameter | 39 mm |
| Type | Seal, oil filler neck cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.33
Important compatibility info
| Width | 9 mm |
| Material | Stainless Steel |
| Thickness | 0.6 mm |
| Function | Clamping Clip |
| Clamping range from | 94 mm |
| Clamping range to | 102 mm |
| Type | Clamping Clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.33
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber |
| Type | Mount, exhaust system |
| Function | Mount, exhaust system |
| Hole Spacing | 43.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.33
Important compatibility info
| Material | Steel |
| Outer diameter | 20 mm |
| Thickness | 3.5 mm |
| Function | Seal, injector holder |
| Type | Seal, injector holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 80 mm |
| Material | Thermoplast |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.34
Important compatibility info
| Length | 103 mm |
| Function | Fuel filter |
| Outer diameter | 36 mm |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Filter type | In-Line Filter |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.34
Important compatibility info
| Material | Steel |
| Thickness | 68 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.34
Important compatibility info
| Material | Steel |
| Screw length below head | 110 mm |
| Bolt Head/Nut Design | Female Star |
| Function | Cylinder Head Bolt |
| Spanner Size | 12 |
| Surface | Phosphatized |
| Type | Cylinder Head Bolt |
| Bolt / Nut Version | with lockwasher |
| External Thread Size | M11 x 1,5 |
| Thread Length | 93 mm |
| Length | 121 mm |
| Number of screws | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.35
Important compatibility info
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
| for OE number | 51.08902.0161 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.35
Important compatibility info
| Width | 37 mm |
| Outer diameter | 65 mm |
| Inner diameter | 9 mm. 14.5 mm |
| Function | Mount, exhaust system |
| Material | Rubber |
| Length | 60 mm |
| Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023