Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 67 mm |
| Function | Tie Rod End |
| Replaces | 08780 |
| Internal Thread Size | M10 x 1 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 89 mm |
| Outer diameter | 27 mm |
| Outer diameter 2 | 26 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 7 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 47 mm |
| Inner diameter | 30 mm |
| Function | Shaft Seal, camshaft |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| for OE number | 1 658 103 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Height | 101 mm |
| Outer diameter | 68 mm |
| Inner diameter | 12 mm |
| Filter type | Filter Insert |
| Seal Diameter | 85 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Height | 167 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Gasket outer diameter | 108.6 mm |
| Gasket inner diameter | 100 mm |
| Type | Oil Filter |
| Outer diameter | 91 mm |
| Inner diameter | 12 mm. 26 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 213 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Type | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Additional Information | with nuts |
| Spanner Size | 17 |
| Material | Steel |
| Diameter | 1 mm |
| Length | 118 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Thread Length | 21 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Function | Air Filter |
| Length | 227 mm |
| Height | 47 mm |
| Width | 173 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
| Inner diameter | 82 mm |
| Height | 175 mm |
| Outer diameter | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.43
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 44 mm |
| Material | Plastic |
| Outer diameter | 107 mm |
| Inner diameter | 35 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Placement on Vehicle | Rear Axle, Rear |
| Width | 52 mm |
| Outer diameter | 45 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Control Type | Rocker Actuation |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Left Rear |
| Function | Switch, window regulator |
| Paired article numbers | 21412 |
| Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Placement on Vehicle | Right Rear |
| Paired article numbers | 21411 |
| Number of Connectors / Ports | 6 |
| Function | Switch, window regulator |
| Control Type | Rocker Actuation |
| Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Height | 165 mm |
| Outer diameter | 128 mm |
| Inner diameter | 93 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Length | 235 mm |
| Height | 59 mm |
| Width | 220 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 69 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 68 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (34943)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi High Temperature Lubricant (03630)
£10.44
Important compatibility info
| Function | Bellow, drive shaft |
| Inner diameter 2 | 72 mm |
| Inner diameter 1 | 22 mm |
| Material | Thermoplast |
| Length | 127 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Height | 106 mm |
| Outer diameter | 64 mm |
| Inner diameter | 31 mm |
| Filter type | Filter Insert |
| Seal Diameter | 69 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Length | 217 mm |
| Thread Length | 7 mm |
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.44
Important compatibility info
| Colour | black |
| Length | 230 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 8 mm |
| Material | Steel |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Length | 267 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Inner diameter | 62 mm |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 3 | 74 mm |
| Additional Information | with grease |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 94 mm. 86 mm. 78 mm. 66 mm. 38 mm. 32 mm. 28 mm. 24 mm |
| Length | 130 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Height | 59 mm |
| Width | 135 mm |
| Length | 306 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Function | Oil Filter |
| Outer diameter | 96 mm |
| Filter type | Spin-on Filter |
| Height | 136 mm |
| Internal Thread Size | M22 x 1,5 |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Height | 195 mm |
| Outer diameter | 78 mm |
| Inner diameter | 23 mm |
| Filter type | Filter Insert |
| Seal Diameter | 93 mm |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Housing material | Metal |
| Filter type | In-Line Filter |
| Outer diameter | 75 mm |
| Length | 166 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Pipe Diameter | 7.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Function | Switch Relay, high beam/low beam |
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Type | Switch Relay, high beam/low beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 103 mm |
| Width | 62 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Length | 79.5 mm |
| Spanner Size | 18 |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 11.9 |
| Function | Pulley Bolt |
| Screw length below head | 56 mm |
| Placement on Vehicle | frontal sided |
| Type | Pulley Bolt |
| Surface | Zink flake coated |
| Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.46
Important compatibility info
| Placement on Vehicle | Rear, Centre |
| Length | 63 mm |
| Bolt Hole Circle Diameter | 11 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.46
Important compatibility info
| Type | Stop- /Mounting Buffer |
| Width | 53 mm |
| Length | 205 mm |
| Thickness | 60 mm |
| Function | Stop- /Mounting Buffer |
| Hole Spacing | 122 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.46
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 77 mm |
| Outer diameter | 24 mm |
| Spanner Size | 16 |
| Surface | Zinc-coated |
| Thread Length | 28 mm |
| Bolt Head/Nut Design | External Hexagon |
| for OE number | 33 30 6 760 591 S1 |
| Quality/ Grade | 10.9 |
| Type | Camber Correction Screw |
| Function | Camber Correction Screw |
| Screw length below head | 66 mm |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (37112)
- 1x Febi Washer (36932)
- 1x Febi Nut (37347)
£10.46
Important compatibility info
| Type | Gasket, oil filter housing |
| for OE number | 03L 198 441 |
| Function | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.46
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 88 mm |
| Rod/Strut | Coupling Rod |
| Additional Information | with rubber mounts, with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Diameter | 1 mm |
| Additional Information 2 | with washers |
| External Thread Size | M8 x 1,25, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (19719)
- 2x Febi Bushing, stabiliser coupling rod (03212)
£10.47
Important compatibility info
| Opening Temperature | 80 °C |
| Function | Thermostat, coolant |
| Replaces | 10267 |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (09739)
- 1x Febi Seal, thermostat (10258)
£10.47
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 61 mm |
| Thickness | 39 mm |
| Paired article numbers | 18101 |
| Rod/Strut | Coupling Rod |
| Thread Length | 17 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Function | Radiator Hose |
| Placement on Vehicle | Lower Right |
| Inner diameter | 20 mm. 25 mm |
| Cooling Hose | from engine cooler to expansion tank |
| Hose Length | 380 mm |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front |
| Length | 63.5 mm. 80 mm |
| Outer diameter | 60 mm |
| Inner diameter | 16.5 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 18 mm |
| Material | Rubber |
| Width | 52 mm |
| Length | 48 mm |
| Placement on Vehicle | Rear Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Inner diameter | 27 mm |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Length | 210 mm |
| Material | PU (Polyurethane), Plastic |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Length | 259 mm |
| Height | 32 mm |
| Width | 98 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 320 mm |
| Material | Steel |
| Thickness | 63 mm |
| Rod/Strut | Suspension Rod |
| Thread Length | 25.4 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Length | 239 mm |
| Height | 50 mm |
| Width | 162 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Type | Mounting, control/trailing arm |
| Inner diameter | 18.3 mm |
| Thickness | 53 mm |
| Outer diameter | 55 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front, Lower, Front Axle Right |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023