Important compatibility info
| Height | 55 mm | 
| Function | Air Filter | 
| Type | Air Filter | 
| Filter type | Filter Insert | 
| Length | 390 mm | 
| Width | 184 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 273 mm | 
| Height | 59 mm | 
| Width | 232 mm | 
| Filter type | Filter Insert | 
| Type | Air Filter | 
| Function | Air Filter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 85 mm | 
| Filter type | Spin-on Filter | 
| Height | 142 mm | 
| Type | Fuel filter | 
| Function | Fuel filter | 
| Internal Thread Size | M16 x 1,5, M8 x 1,25 | 
| Seal Diameter | 69 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Valve seat angle | 30 ° | 
| Valve head diameter | 36.8 mm | 
| Notches / Holes Number | 3 | 
| Function | Intake Valve | 
| Type | Intake Valve | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material | 
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right | 
| Cone Size | 17 mm | 
| Function | Ball Joint | 
| Extra Description | ProKit | 
| Type | Ball Joint | 
| Steering arm type | for control arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (07855)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Length | 72 mm | 
| Spanner Size | 17 | 
| Rod/Strut | Coupling Rod | 
| Colour | Black | 
| Surface | Painted | 
| Function | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,25 | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal Set, valve stem | 
| Type | Seal Set, valve stem | 
| for OE number | 117 050 03 67 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 9 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Length | 199 mm | 
| Material | Steel | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,25 | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) | 
| Thickness | 11.9 mm | 
| Inner diameter | 38.5 mm. 40 mm | 
| Outer diameter | 76 mm | 
| Function | Shaft Seal, differential | 
| Placement on Vehicle | Rear Axle, both sides | 
| Type | Shaft Seal, differential | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front, Lower, Front Axle Right | 
| Length | 67 mm | 
| Width | 46 mm | 
| Material | Rubber/Metal | 
| Outer diameter | 55.2 mm | 
| Inner diameter | 16.1 mm | 
| Function | Mounting, control/trailing arm | 
| Type | Mounting, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar | 
| Outer diameter | 50 mm | 
| Thickness | 47 mm | 
| Placement on Vehicle | Front Axle, Rear Axle, outer | 
| Inner diameter | 16 mm | 
| Type | Mounting, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 142 mm | 
| Outer diameter | 79 mm | 
| Filter type | Spin-on Filter | 
| Function | Oil Filter | 
| External Thread Size | M27 x 1,5 | 
| Gasket outer diameter | 72 mm | 
| Type | Oil Filter | 
| Gasket inner diameter | 63 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 4 | 
| DIN / ISO | 7867 | 
| Function | V-Ribbed Belt | 
| Chemical Properties | Elastic | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Length | 906 mm | 
| Additional Information 2 | Requires special tools for mounting | 
| Type | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 30 mm | 
| Width | 11 mm | 
| Material | PU (Polyurethane) | 
| Function | Rubber Buffer, suspension | 
| Placement on Vehicle | Rear Axle | 
| Type | Rubber Buffer, suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert | 
| Width | 181 mm | 
| Height | 45 mm | 
| Length | 191 mm | 
| Type | Air Filter | 
| Function | Air Filter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 30 mm | 
| Outer diameter | 55 mm | 
| Material | Rubber/Metal | 
| Type | Bush, driver cab suspension | 
| Function | Bush, driver cab suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 124.7 mm | 
| Type | Intake Valve | 
| Valve stem diameter | 7.005 mm | 
| Function | Intake Valve | 
| Valve head diameter | 33 mm | 
| Notches / Holes Number | 1 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 208 mm | 
| Material | Thermoplastic polyester elastomer | 
| Inner diameter 1 | 13 mm | 
| Inner diameter 2 | 51 mm | 
| Type | Bellow Kit, steering | 
| Function | Bellow Kit, steering | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Rear, outer | 
| Inner diameter | 15 mm | 
| Outer diameter | 40 mm | 
| Height | 48 mm | 
| Function | Mounting, wheel bearing housing | 
| Type | Mounting, wheel bearing housing | 
| Replaces | 02354 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Material | Plastic | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Length | 160 mm | 
| Extra Description | ProKit | 
| External Thread Size | M10 x 1,5 | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side | 
| Length | 100 mm | 
| Material | Rubber | 
| Inner diameter 1 | 20 mm | 
| Inner diameter 2 | 68 mm | 
| Function | Bellow Kit, drive shaft | 
| Type | Bellow Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03292)
- 1x Febi Clamping Clip (45641)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Material | Cast Iron | 
| Function | Wheel Brake Cylinder | 
| Piston Diameter | 17.5 mm | 
| Type | Wheel Brake Cylinder | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air | 
| Filter type | Activated Carbon Filter | 
| Width | 200 mm | 
| Height | 30 mm | 
| Length | 214 mm | 
| Type | Filter, cabin air | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Length | 348 mm | 
| Inner diameter | 12 mm | 
| Spanner Size | 30 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M12 x 1,75 | 
| Type | Link/Coupling Rod, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cooling Hose | from engine to thermostat | 
| Function | Radiator Hose | 
| Type | Radiator Hose | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right, Rear | 
| Material | Rubber/Metal | 
| Outer diameter | 49 mm | 
| Thickness | 70 mm | 
| Inner diameter | 14.3 mm | 
| Type | Mounting, control/trailing arm | 
| Function | Mounting, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Protection Lid, wheel hub | 
| Type | Protection Lid, wheel hub | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft | 
| Type | Bellow Kit, drive shaft | 
| Joint Type | CV Joint | 
| Inner diameter 2 | 55 mm | 
| Inner diameter 1 | 20 mm | 
| Material | NBR (nitrile butadiene rubber) | 
| Length | 96 mm | 
| Placement on Vehicle | transmission sided, Front Axle | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175241)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Additional Information 2 | with clamps | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Material | Rubber | 
| Function | Bellow Kit, steering | 
| Inner diameter 2 | 53 mm | 
| Inner diameter 1 | 37 mm | 
| Length | 175 mm | 
| Type | Bellow Kit, steering | 
| Additional Information | with grease | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 250 mm | 
| Rod/Strut | Coupling Rod | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 19161 | 
| Opening Temperature | 92 °C | 
| Function | Thermostat, coolant | 
| Type | Thermostat, coolant | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Mounting and Bolting Kit, control/trailing arm | 
| Type | Mounting and Bolting Kit, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bolt, control arm (24381)
- 2x Febi Bolt, control arm (24385)
- 6x Febi Nut, ball joint (24383)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Width | 15 mm | 
| Outer diameter | 112 mm | 
| Inner diameter | 91 mm | 
| Bearing Type | Angular Ball Bearing | 
| Function | Rolling Bearing, suspension strut support mount | 
| Type | Rolling Bearing, suspension strut support mount | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Length | 75 mm | 
| Paired article numbers | 08096 | 
| Function | Tie Rod End | 
| Internal Thread Size | M14 x 2 | 
| External Thread Size | M10 x 1,25 | 
| Type | Tie Rod End | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Length | 75 mm | 
| Paired article numbers | 08097 | 
| Function | Tie Rod End | 
| Internal Thread Size | M14 x 2 | 
| Type | Tie Rod End | 
| External Thread Size | M10 x 1,25 | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Length | 87.2 mm | 
| Width | 42.5 mm | 
| Wear Warning Contact | excl. wear warning contact | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 14.5 mm | 
| Function | Brake Pad Set, disc brake | 
| Type | Brake Pad Set, disc brake | 
| Additional Information 2 | with bolts/screws | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M10 x 1 | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 379 mm | 
| Outer diameter | 10 mm | 
| Inner diameter | 3 mm | 
| Function | Brake Hose | 
| Type | Brake Hose | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Rod/Strut | Coupling Rod | 
| Material | Steel | 
| Spanner Size | 17 | 
| Colour | Black | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information 2 | with nut, with washers | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 115 mm | 
| Width | 74 mm | 
| Function | Spring Clamp | 
| External Thread Size | M14 x 1,5 | 
| Type | Spring Clamp | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 46 mm | 
| Width | 57 mm | 
| Material | Rubber/Metal | 
| Outer diameter | 57 mm | 
| Thickness | 57 mm | 
| Inner diameter | 18 mm | 
| Type | Mounting, stabiliser bar | 
| Function | Mounting, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.12 kg | 
| Placement on Vehicle | Rear Axle left or right | 
| Material | PU (Polyurethane) | 
| Thickness | 119.0 mm | 
| Type | Rubber Buffer, suspension | 
| Function | Rubber Buffer, suspension | 
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Width | 68 mm | 
| Outer diameter | 53 mm | 
| Thickness | 59 mm | 
| Inner diameter | 27 mm | 
| Function | Mounting, stabiliser bar | 
| Type | Mounting, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with clamps | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 200 mm | 
| Material | Thermoplast | 
| Inner diameter 1 | 12 mm | 
| Inner diameter 2 | 53 mm | 
| Function | Bellow Kit, steering | 
| Type | Bellow Kit, steering | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101723)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (100698)
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle | 
| Type | Accessory Kit, disc brake pad | 
| Function | Accessory Kit, disc brake pad | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Function | Accessory Kit, brake shoes | 
| Type | Accessory Kit, brake shoes | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber, Plastic | 
| Function | Bush, driver cab suspension | 
| Type | Bush, driver cab suspension | 
| Inner diameter | 23.49 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 57 mm | 
| Width | 232 mm | 
| Filter type | Filter Insert | 
| Function | Air Filter | 
| Type | Air Filter | 
| Length | 309 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 300 mm | 
| External Thread Size | M10 x 1 | 
| Function | Brake Hose | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer | 
| Type | Brake Hose | 
| Internal Thread Size | M10 x 1 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Length | 435 mm | 
| Type | Brake Hose | 
| Function | Brake Hose | 
| External Thread Size | M10 x 1 | 
| Internal Thread Size | M10 x 1 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 317 mm | 
| Height | 38 mm | 
| Width | 236 mm | 
| Filter type | Pollen Filter | 
| Type | Filter, cabin air | 
| Function | Filter, cabin air | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































