Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 343 mm |
| Outer thread | M14 x 1,5 mm |
| Weight | 0.460 kg |
| Placement on Vehicle | Front Axle left or right |
| Type | Tie Rod Axle Joint |
| Function | Tie Rod Axle Joint |
| Driver Position | for left-hand drive vehicles |
£18.09
Important compatibility info
| Paired article numbers | 107672 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.122 kg |
| Cable Length | 810 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.07
Important compatibility info
| Weight | 1.530 kg |
| Placement on Vehicle | Front Axle |
| Length | 131.4 mm |
| Width | 53.7 mm. 65 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 12.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.07
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178748 |
| Weight | 5.2 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.68
Important compatibility info
| Weight | 0.524 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 19 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (02942)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (22263)
£11.82
Important compatibility info
| Weight | 0.18 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 145 mm |
| Thickness | 55 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Replaces | 27411 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.86
Important compatibility info
| Weight | 3.43 kg |
| Placement on Vehicle | Rear Axle |
| Width | 55 mm |
| Outer diameter | 270 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.00
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 1 |
| for OE number | 4G0 199 381 NF |
| Weight | 1.565 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NG (febi 180461 / SWAG 33 10 7686).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.68
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Weight | 0.025 kg |
| for OE number | 13 62 7 806 782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Type | Suspension Spring |
| Weight | 1.7 kg |
| Number of Coils | 5.3 |
| Outer diameter | 140 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 326 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Weight | 0.973 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Outer diameter | 153 mm |
| Inner diameter | 16 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 81 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.15
Important compatibility info
| Weight | 0.177 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Replaces | 10508 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.18 kg |
| Material | Plastic |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 11 28 7 500 560 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.57
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Weight | 5.615 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 257 mm |
| Thickness | 36 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.6 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 88 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.60
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 648 mm |
| Min. Length | 400 mm |
| Pipe Diameter | 76 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Weight | 5.02 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.11
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 178 mm |
| Additional Information | with lock nut |
| Spanner Size | 23 |
| Paired article numbers | 196162 |
| Weight | 0.464 kg |
| Cone Size | 12 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Cone Size 2 | 15.8 mm |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.65
Important compatibility info
| Weight | 0.120 kg |
| Paired article numbers | 23824 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.12
Important compatibility info
| Outer diameter | 430 mm |
| for OE number | 2 421 930 |
| Type | Clutch Disc |
| Number of Teeth | 24 |
| Weight | 10.382 kg |
| Function | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£329.17
Important compatibility info
| Paired article numbers | 175502 |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Weight | 0.27 kg |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
| Extra Description | febi Plus |
| Placement on Vehicle | Sliding Door, Left |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.49
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
| Weight | 0.033 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.11
Important compatibility info
| Brake caliper piston diameter | 57 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 4.26 kg |
| Paired article numbers | 181958 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.28
Important compatibility info
| Pressure side external thread size | M12 x 1,5 |
| Function | Tilt Cylinder, driver cab |
| Placement on Vehicle | Right |
| Length | 545 mm |
| Outer diameter | 50 mm |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
| Number of Connectors / Ports | 3 |
| Weight | 5.5 kg |
| Stroke | 397 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£247.13
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 86 mm |
| Outer diameter | 30 mm |
| Inner diameter | 23 mm |
| Function | Bushing, leaf spring hanger |
| Type | Bushing, leaf spring hanger |
| Weight | 0.196 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.32
Important compatibility info
| Weight | 2.34 kg |
| Thickness/Strength 1 | 19.8 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | incl. wear warning contact |
| Width | 74.9 mm. 73.4 mm |
| Length | 156.4 mm. 155.2 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.20
Important compatibility info
| Weight | 0.122 kg |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.10
Important compatibility info
| Protection Type (IP Code) | IP6K9K |
| Depth | 49 mm |
| Housing material | Aluminium |
| Lumen | 2500 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Type | Worklight |
| Fulfils ECE norm | R10, R148 |
| Weight | 0.580 kg |
| Height | 145 mm |
| Inspection Tag | EMC, ADR, Cispr 25 Class 3 |
| Width | 115 mm |
| Cable Length | 200 mm |
| Light Distribution | Long-range illumination |
| Voltage from | 9 V |
| Voltage to | 36 V |
| Plug Type | DEUTSCH plug |
| Number of Connectors / Ports | 2 |
| Rated Power | 24 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Extra Description | febi Plus |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Seal Material | Rubber/Metal |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of grooves | 5 |
| Weight | 1.30 kg |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£142.30
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 6.0 kg |
| Surface | Oiled |
| Centering Diameter | 52 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Brake Disc Thickness | 8 mm |
| Additional Information 2 | with ABS sensor ring |
| Thickness | 86 mm |
| Outer diameter | 260 mm |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.56
Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Weight | 0.051 kg |
| Type | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.55
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Weight | 0.404 kg |
| Internal Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.26
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.646 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 288 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.68
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 315 mm |
| Function | Inner Tie Rod |
| Weight | 0.795 kg |
| Outer diameter | 18 mm |
| Type | Inner Tie Rod |
| for OE number | 3812.99 |
| Additional Information 2 | with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.07
Important compatibility info
| Length | 174 mm |
| Width | 158 mm |
| Material | Rubber/Metal |
| Outer diameter | 66 mm. 109 mm |
| Inner diameter | 14 mm |
| Weight | 1.1 kg |
| Paired article numbers | 18734 |
| Placement on Vehicle | Front Axle Left |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Internal Thread Size | M8 x 1,25 |
| Height | 52 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 429 mm |
| Paired article numbers | 02634 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Weight | 1.130 kg |
| External Thread Size | M16 x 1,5, M8 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.93
Important compatibility info
| Length | 157.9 mm |
| Valve stem diameter | 7.15 mm |
| Valve head diameter | 40.57 mm |
| Weight | 0.115 kg |
| Notches / Holes Number | 1 |
| Type | Intake Valve |
| Function | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.63
Important compatibility info
| Weight | 0.739 kg |
| Material | Cast Aluminium |
| Number of Teeth | 21 |
| Number of Wings | 20 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.60
Important compatibility info
| Weight | 0.16 kg |
| Width of castor bearing surface | 22.5 mm |
| Material | Plastic |
| Outer diameter | 62 mm. 69 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness | 100 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Weight | 0.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.40
Important compatibility info
| Weight | 0.249 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 25280 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.26
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | EGR Valve |
| Weight | 0.89 kg |
| Type | EGR Valve |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£637.06
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 98 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 56 mm |
| Weight | 0.5 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22607)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Nut, kingpin (02346)
£11.75
Important compatibility info
| Outer diameter | 145 mm |
| Number of Holes | 5 |
| Placement on Vehicle | Rear Axle |
| Weight | 1.8 kg |
| Number of Teeth | 30 |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 7.619 kg |
| Placement on Vehicle | non-steered trailing axle, non-steered leading axle, Rear Axle, Front Axle, steered leading axle, Steered trailing axle |
| Length | 216 mm |
| Width | 100 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.13
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 200 mm |
| Height | 30 mm |
| Length | 214 mm |
| Type | Filter, cabin air |
| Weight | 0.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 3.64 kg |
| Replaces | 20015 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Weight | 0.72 kg |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 111 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Weight | 0.188 kg |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172949)
- 1x Febi Molybdenum Grease (02582)
£20.63
Important compatibility info
| Thickness | 1.75 mm |
| Inner diameter | 91 mm |
| Weight | 0.244 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Cable Length | 2300 mm |
| Paired article numbers | 103770 |
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Right |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Weight | 0.125 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.56
Important compatibility info
| Length | 152 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Outer diameter | 84.5 mm |
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 51 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 24 |
| External Thread Size | M24 x 1,5 |
| Weight | 1.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023