Proud to be a UK-based company
Contact us
Important compatibility info
| Opening Pressure | 1.4 bar |
| Material | Plastic |
| for OE number | 970 501 01 65 |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Function | Air Filter |
| Length | 290 mm |
| Height | 43 mm |
| Width | 258 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Placement on Vehicle | Lower |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 26 mm |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 90 mm |
| Width | 70 mm |
| Material | Rubber/Metal |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Placement on Vehicle | Right |
| Width | 55 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 55 mm |
| Inner diameter | 33 mm |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Length | 11 mm |
| Material | Steel |
| Outer diameter | 20 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | TX 40 |
| Thread Length | 7.5 mm |
| Bolt Head/Nut Design | Female Torx |
| Type | Screw Plug, oil sump |
| Function | Screw Plug, oil sump |
| Screw length below head | 9 mm |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw Plug, automatic transmission casing (172177)
- 1x Febi Gasket, automatic transmission oil sump (172223)
£11.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 96 mm |
| Width | 56 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 61 mm |
| Inner diameter | 8 mm |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Length | 115 mm |
| Height | 47 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 168 mm |
| Material | Thermoplast |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 45 mm |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Material | PU (Polyurethane), Rubber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12495)
- 2x Febi Protective Cap/Bellow, shock absorber (12502)
£11.35
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1695 mm |
| Paired article numbers | 28736 |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 79 °C |
| Heating / Cooling | without vent hole |
| Additional Information 2 | with seal ring |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (10528)
- 1x Febi Gasket, water pump (03505)
£11.35
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
| Length | 145 mm |
| Width | 86 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Width | 43 mm |
| Thickness | 46 mm |
| Function | Mounting, stabiliser bar |
| Length | 48 mm |
| Type | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Inner diameter | 25.1 mm |
| Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Height | 103 mm |
| Internal Thread Size | M24 x 1,5 |
| Function | Oil Filter |
| Outer diameter | 100 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Colour | Silver |
| Paired article numbers | 48031 |
| Spanner Size | 17 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Length | 113 mm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 3 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 498 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.36
Important compatibility info
| Additional Information | with lock nut |
| Height | 71 mm |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 90 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Cone Size 2 | 15 mm |
| Cone Size 1 | 13.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023