Important compatibility info
Placement on Vehicle | Rear |
Weight | 0.533 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, accelerator pedal position |
Weight | 0.643 kg |
for OE number | 1 364 185 |
Type | Sensor, accelerator pedal position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 122.5 mm |
Thickness/Strength 1 | 16.2 mm |
Width | 62 mm. 56.2 mm |
Weight | 1.02 kg |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Length | 2100 mm |
Function | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.214 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.735 kg |
Height | 183 mm |
Filter type | Spin-on Filter, with water separator |
Function | Fuel filter |
Internal Thread Size | M20 x 1,5 |
Type | Fuel filter |
Outer diameter | 96 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.580 kg |
Additional Information 2 | without lid |
for OE number | 1 863 539 |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 109 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.110 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03335)
- 1x Febi Spring Washer (03336)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Core Depth | 42 mm |
Core Width | 370 mm |
Core Length | 188 mm |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Weight | 1.048 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Bore Diameter | 35 mm. 21 mm |
Weight | 5.000 kg |
Type | Link/Coupling Rod, stabiliser bar |
Diameter | 1 mm |
Length | 365 mm |
Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, boost pressure |
Weight | 0.039 kg |
Number of Connectors / Ports | 4 |
Type | Sensor, boost pressure |
for OE number | 51.27421.0169 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023