Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Length | 300 mm | 
| Paired article numbers | 24623 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic | 
| Function | Coolant Flange | 
| Type | Coolant Flange | 
| for OE number | 11 53 1 709 232 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5 | 
| Rod/Strut | Coupling Rod | 
| Material | Steel | 
| Length | 229 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 92 °C. 107 °C | 
| Function | Thermostat, coolant | 
| Type | Thermostat, coolant | 
| Additional Information 2 | with seal ring | 
| for OE number | 13 38 865 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (10510)
 - 1x Febi Seal, thermostat (05125)
 
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Length | 255 mm | 
| Material | Steel | 
| Paired article numbers | 19650 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
| External Thread Size | M10 x 1,5 | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 54 mm | 
| Material | Rubber/Metal | 
| Placement on Vehicle | Front Axle, inner | 
| Length | 54 mm | 
| Function | Mounting, stabiliser bar | 
| Outer diameter | 54 mm | 
| Thickness | 48 mm | 
| Inner diameter | 35 mm | 
| Type | Mounting, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic | 
| for OE number | 1 874 363 | 
| Type | Cap, coolant tank | 
| Function | Cap, coolant tank | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, crankshaft pulse | 
| Number of Connectors / Ports | 3 | 
| Type | Sensor, crankshaft pulse | 
| Additional Information 2 | with seal ring | 
| Replaces | 39605 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert | 
| Height | 66 mm | 
| Function | Hydraulic Filter, automatic transmission | 
| Gasket inner diameter | 46.2 mm | 
| Gasket outer diameter | 50 mm | 
| Inner diameter | 11 mm | 
| Outer diameter | 37 mm | 
| Type | Hydraulic Filter, automatic transmission | 
| Additional Information | with gaskets/seals | 
| Transmission Type | CVT Automatic Transmission (stepless) | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension | 
| Length | 127 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Material | PU (Polyurethane) | 
| Outer diameter | 66 mm | 
| Type | Rubber Buffer, suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 43 mm | 
| Width | 209 mm | 
| Filter type | Pollen Filter | 
| Type | Filter, cabin air | 
| Function | Filter, cabin air | 
| Length | 210 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with grease | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Bellow Kit, steering | 
| Inner diameter 2 | 51 mm | 
| Inner diameter 1 | 37 mm | 
| Material | Rubber | 
| Length | 185 mm | 
| Type | Bellow Kit, steering | 
| Additional Information 2 | with clamps | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (12646)
 - 1x Febi Clamping Clip (38762)
 - 1x Febi Clamping Clip (02092)
 - 1x Febi Molybdenum Grease (02582)
 
Important compatibility info
| Material | Plastic | 
| Function | Cap, coolant tank | 
| Opening Pressure | 2 bar | 
| for OE number | 17 11 7 639 022 | 
| Type | Cap, coolant tank | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Length | 61.7 mm | 
| Width | 56.5 mm | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 14.5 mm | 
| Function | Brake Pad Set, disc brake | 
| Type | Brake Pad Set, disc brake | 
| Replaces | 16230 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 29 | 
| Number of Connectors / Ports | 2 | 
| Switch Point | 95 °C | 
| Function | Temperature Switch, radiator fan | 
| External Thread Size | M22 x 1,5 | 
| Type | Temperature Switch, radiator fan | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut | 
| Length | 216 mm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Inner Tie Rod | 
| External Thread Size | M16 x 1,5, M12 x 1 | 
| Extra Description | ProKit | 
| Type | Inner Tie Rod | 
| for OE number | 16 111 586 80 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 12 mm. 16 mm | 
| Outer diameter | 125 mm | 
| Inner diameter | 105 mm | 
| Function | Shaft Seal, manual transmission | 
| Type | Shaft Seal, manual transmission | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Jet, piston underside cooling | 
| Extra Description | febi Plus | 
| Function | Oil Jet, piston underside cooling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fuel Filter | 
| Internal Thread Size | M22 x 1,5 | 
| Filter type | Spin-on Filter | 
| Height | 142 mm | 
| Outer diameter | 94 mm | 
| Type | Fuel Filter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Length | 110 mm | 
| Material | Steel | 
| Spanner Size | 19 | 
| Rod/Strut | Coupling Rod | 
| Colour | Black | 
| Thread Length | 22 mm | 
| Pipe Diameter | 9 mm | 
| Function | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M12 x 1,25 | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
                  
                
                  
                
                  
                
                  
                
                  
                
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















