Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Thermostat, coolant |
| Heating / Cooling | without vent hole |
| Opening Temperature | 65 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.49
Important compatibility info
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Length | 265 mm |
| Additional Information | with counter nut |
| Outer diameter | 40 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 38 |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.49
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Additional Information | with crown nut and split pin |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.49
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 181 mm |
| Width | 36 mm |
| Additional Information | with lock nut |
| Thickness | 79 mm |
| Spanner Size | 19 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.49
Important compatibility info
| Filter type | Filter Insert |
| Height | 66 mm |
| Function | Hydraulic Filter, automatic transmission |
| Gasket inner diameter | 46.2 mm |
| Gasket outer diameter | 50 mm |
| Inner diameter | 11 mm |
| Outer diameter | 37 mm |
| Type | Hydraulic Filter, automatic transmission |
| Additional Information | with gaskets/seals |
| Transmission Type | CVT Automatic Transmission (stepless) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.49
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 175 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 47 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.49
Important compatibility info
| Material | Plastic |
| Function | Cap, coolant tank |
| Opening Pressure | 2 bar |
| for OE number | 17 11 7 639 022 |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 61.7 mm |
| Width | 56.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Replaces | 16230 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Spanner Size | 29 |
| Number of Connectors / Ports | 2 |
| Switch Point | 95 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | MVQ (silicone rubber) |
| Outer diameter | 160 mm |
| Thickness | 15 mm |
| Inner diameter | 130 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Material | ACM (Polyacrylate) |
| Outer diameter | 130 mm |
| Thickness | 12 mm |
| Inner diameter | 105 mm |
| Type | Shaft Seal, manual transmission main shaft |
| Function | Shaft Seal, manual transmission main shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Additional Information | with counter nut |
| Length | 216 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5, M12 x 1 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| for OE number | 16 111 586 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Function | Fuel Filter |
| Internal Thread Size | M22 x 1,5 |
| Filter type | Spin-on Filter |
| Height | 142 mm |
| Outer diameter | 94 mm |
| Type | Fuel Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 172 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 15 mm |
| Inner diameter 2 | 52 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 110 mm |
| Material | Steel |
| Spanner Size | 19 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Thread Length | 22 mm |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Colour | Brown |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.50
Important compatibility info
| Additional Information | with grease |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 51 mm |
| Inner diameter 1 | 37 mm |
| Material | Rubber |
| Length | 185 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (12646)
- 1x Febi Clamping Clip (38762)
- 1x Febi Clamping Clip (02092)
- 1x Febi Molybdenum Grease (02582)
£11.50
Important compatibility info
| Replaces | 08337 |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 82 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 75 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03170)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
£11.51
Important compatibility info
| Material | Rubber/Metal |
| Inner diameter | 16 mm |
| Outer diameter | 86 mm |
| Placement on Vehicle | Upper, Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 32 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Paired article numbers | 09593 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Paired article numbers | 09592 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 470 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front |
| Length | 63.5 mm. 80 mm |
| Outer diameter | 60 mm |
| Inner diameter | 16.5 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Height | 50 mm |
| Outer diameter | 42 mm |
| Inner diameter | 17 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Hose Length | 381 mm |
| Inner diameter | 16 mm |
| Function | Hydraulic Hose, steering |
| Material | NBR (nitrile butadiene rubber) |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Width | 245 mm |
| Filter type | Activated Carbon Filter, Filter Insert |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 290 mm |
| Height | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Paired article numbers | 09595 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Inner diameter | 54 mm |
| Sealing lip material | FPM (fluoride rubber) |
| Width | 8 mm |
| Outer diameter | 68 mm |
| Placement on Vehicle | frontal sided |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.51
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 170 mm |
| Material | Steel |
| Spanner Size | 14 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Surface | Painted |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Replaces | 41626 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.52
Important compatibility info
| Pipe Diameter | 11 mm |
| Length | 263 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023