Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Placement on Vehicle | inner, Front Axle Left, Front Axle Right, Rear, Lower |
| Inner diameter | 14.4 mm |
| Weight | 0.552 kg |
| Outer diameter | 74.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.96
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | FPM (fluoride rubber) |
| Outer diameter | 88 mm |
| Thickness | 8 mm |
| Inner diameter | 74 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Weight | 0.01 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.77
Important compatibility info
| Weight | 0.095 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.91
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 108.6 mm |
| Width | 42.8 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 0.82 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.18
Important compatibility info
| Placement on Vehicle | Engine Compartment |
| Length | 304 mm |
| Height | 35 mm |
| Width | 155 mm |
| Filter type | Pre-Filter, Pollen Filter |
| Weight | 0.095 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.57
Important compatibility info
| Type | Timing Chain Kit |
| Number of Chain Links | 132 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Weight | 0.6 kg |
| for OE number | 14401-RB1-003 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49572)
- 1x Febi Holder, timing chain slide rail (175068)
- 1x Febi Guide, timing chain (175061)
- 1x Febi Guide, timing chain (175076)
£123.24
Important compatibility info
| Outer diameter | 370 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Weight | 11.5 kg |
| Surface | Coated |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22.4 mm |
| Thickness | 64 mm |
| Brake Disc Thickness | 24 mm |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 67 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£218.06
Important compatibility info
| Function | Clamping Bolt Set, ball joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.028 kg |
| Type | Clamping Bolt Set, ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Nut, ball joint (32487)
- 3x Febi Screw (47798)
£9.80
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| Weight | 0.149 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.07
Important compatibility info
| Outer diameter | 65 mm |
| Thickness | 23 mm |
| Inner diameter | 20 mm |
| Weight | 0.05 kg |
| Material | Rubber |
| Placement on Vehicle | Rear Axle Lower, Front |
| Function | Mounting, differential |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.33
Important compatibility info
| Weight | 0.25 kg |
| Length | 75 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 34758 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Placement on Vehicle | Front Axle Left |
| Surface | Painted |
| External Thread Size | M10 x 1,25 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.55
Important compatibility info
| Length | 113 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Weight | 0.29 kg |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.81
Important compatibility info
| Weight | 1.632 kg |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 31789 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31705)
- 1x Febi Tie Rod End (29673)
£23.53
Important compatibility info
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 30867 |
| Weight | 3.44 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Length | 125 mm |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Diameter | 1 mm |
| Material | Steel |
| Spanner Size | 22 |
| Rod/Strut | Coupling Rod |
| Weight | 0.180 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Width | 28 mm |
| Number of Teeth | 130 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Weight | 0.18 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.068 kg |
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| for OE number | 11 12 7 572 851 |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.83
Important compatibility info
| Function | Bellow, drive shaft |
| Inner diameter 2 | 74 mm |
| Inner diameter 1 | 32 mm |
| Material | Thermoplast |
| Length | 116 mm |
| Weight | 0.07 kg |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.96
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 2005 mm. 1843 mm |
| Function | Cable Pull, parking brake |
| Weight | 0.731 kg |
| Paired article numbers | 48304 |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.33
Important compatibility info
| Width | 61.4 mm. 56.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.9 mm |
| Function | Brake Pad Set, disc brake |
| Length | 123.2 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 1.055 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.47
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Max. Length | 562 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Min. Length | 362 mm |
| Weight | 4.75 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.27
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 10.43 kg |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Minimum thickness | 26.4 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 49.1 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 321 mm |
| Type | Brake Disc Rotor |
| for OE number | 51712-2B700 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.32
Important compatibility info
| Weight | 0.193 kg |
| Opening Temperature | 98 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.06
Important compatibility info
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Paired article numbers | 186336 |
| Colour | Black |
| Weight | 1.653 kg |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Material | Plastic |
| Additional Information | with gasket/seal |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.44
Important compatibility info
| Placement on Vehicle | Lower Right |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Weight | 0.470 kg |
| Hose Length | 350 mm |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.59
Important compatibility info
| Piston Diameter | 20.6 mm |
| Weight | 0.406 kg |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.12
Important compatibility info
| Outer diameter | 9 mm. 25 mm |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Weight | 0.790 kg |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.01 kg |
| External Thread Size | M10 x 1 |
| Type | Screw Plug, transmission housing |
| Spanner Size | 5 |
| Function | Screw Plug, transmission housing |
| Length | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.77
Important compatibility info
| Fill quantity | 11.5 l |
| Weight | 2.615 kg |
| Function | Expansion Tank, coolant |
| Thickness | 147 mm |
| Number of Connectors / Ports | 2 |
| Material | PP (Polypropylene) |
| Width | 174 mm |
| Length | 477 mm |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 394 mm |
| Outer diameter | 138 mm |
| Weight | 2.01 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023